Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Palm Springs, FL
Window and door installation in Palm Springs, FL typically runs $650-$2,800 per opening depending on product tier, with most homes in the village needing full-house conversions from original 1960s jalousie and single-pane aluminum units to Florida Product Approved impact-rated assemblies. We coordinate dispatch from our Miami office and arrive with a measured survey that becomes your written quote under Haven Clause 1. Call (561) 286-4734 to schedule your free estimate.
Why Palm Springs Homes Are Different
Palm Springs built out almost entirely between 1957 and 1970, which means the housing stock here is remarkably uniform: post-WWII CBS construction with original jalousie windows and single-pane aluminum sliders that insurers are now flagging for mandatory upgrade. In neighborhoods throughout the village, we’re seeing concentrated insurance non-renewal campaigns - Citizens Property Insurance and private carriers issuing 30-90 day cure notices that turn individual window replacements into full-house permit pulls.
The salt-laden humidity at 10 miles from the Atlantic has accelerated oxidation of those original aluminum frames, and the 140+ mph design wind speed for Palm Beach County means every replacement must carry Florida Product Approval or pair with a compliant shutter system. Palm Beach County Building inspectors know these CBS rough-opening conditions well; they’ve reviewed hundreds of Palm Springs permits for adapter framing on jalousie-to-impact conversions. That familiarity speeds inspection, but only when the initial measured survey documents the existing frame dimensions accurately.
Our Main Palm Springs Services
Most calls from Palm Springs homeowners center on two needs: compliance-driven full-house window replacement, and the door upgrades that complete the building envelope. Here is how we handle each.
Window Replacement in Palm Springs
We replace original jalousie and single-pane aluminum units with impact-rated or energy-efficient windows, pulling full-house permits through Palm Beach County Building when the job is driven by insurance cure notices. The measured survey documents your existing rough openings, and that same document becomes your written quote. Window Replacement in Palm Springs covers our complete process for these village-specific conversions.
Impact Windows & Doors in Palm Springs
Impact-rated assemblies satisfy the wind-borne debris requirements for Palm Beach County without secondary shutters, and they’re the standard specification on nearly every Palm Springs job we write. We specify PGT, CGI, CWS, and ES Windows products by performance tier, matching the opening to the rating required. Impact Windows & Doors in Palm Springs details the product lines and approval documentation.
Sliding & Patio Doors in Palm Springs
The original sliding glass doors in 1960s Palm Springs homes often share the same single-pane, non-impact pedigree as the windows, and they’re frequently the last opening homeowners address. We measure the existing track and frame conditions, specify replacement from ECO Window Systems or Mr-Glass where the span requires it, and document the sill pan and flashing details in the photo record. Sliding & Patio Doors in Palm Springs explains our measured survey process for these larger openings.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Palm Springs
Window installation in Palm Springs means converting original 1957-1970 jalousie and single-pane aluminum assemblies to modern impact-rated or energy-efficient units, almost always with custom adapter framing to fit the CBS rough openings that were never designed for today’s product depths. The salt-oxidized frames we remove often reveal moisture intrusion at the sill that must be addressed before the new unit is set, and every job we write in this village carries the full permit and inspection sequence through Palm Beach County Building because the stakes are insurance compliance, not preference. Our Window Installation hub details the Haven Standard process we apply to every opening.
Single & Double Hung Windows
Signs you need it
Your jalousie cranks no longer seal against wind-driven rain, or your single-pane aluminum hung units show salt corrosion at the sill and rail joints.
What it costs in Palm Springs
Single and double hung window installation in Palm Springs typically ranges from $650 to $1,400 per opening for vinyl or aluminum impact-rated units, with custom adapter framing adding $120-$280 where the existing CBS rough opening requires build-out.
How we do it
We remove the existing frame, document the rough opening dimensions and any moisture damage on the measured survey you keep, install pressure-treated adapter framing as needed, set the new unit with proper shimming and sealant, and schedule Palm Beach County inspection before interior trim goes back.
Horizontal Roller Windows
Signs you need it
Your original horizontal slider’s track is corroded from salt humidity, the sash no longer locks securely, or the single-pane glass lacks Miami-Dade or Florida Product Approval.
What it costs in Palm Springs
Horizontal roller window installation in Palm Springs typically ranges from $720 to $1,550 per opening for impact-rated units, with wider two- and three-panel configurations at the upper end of that range.
How we do it
We measure the existing track width and sill condition, specify the roller configuration from our eight manufacturer lines based on your performance tier and budget, fabricate adapter framing for the CBS opening, and document the installation with the photo record included on every job.
What Window Installation Costs in Palm Springs
| Item | Typical range in Palm Springs |
|---|---|
| Single/Double Hung Window (impact-rated, installed) | $650 - $1,400 |
| Horizontal Roller Window (impact-rated, installed) | $720 - $1,550 |
| Custom adapter framing per opening | $120 - $280 |
How long does window installation take in Palm Springs?
Most full-house window replacements in Palm Springs take 2-4 days for installation, plus permit submission and inspection scheduling through Palm Beach County Building. Call (561) 286-4734 for a measured survey and written timeline.
Will new windows pass my insurance inspection?
We specify only Florida Product Approved or Miami-Dade approved impact-rated units for Palm Springs jobs, and the permit documentation we provide satisfies Citizens Insurance and private carrier requirements. Call (561) 286-4734 to review your cure notice.
Door Installation in Palm Springs
Door installation in Palm Springs addresses the same era-specific vulnerabilities as window work: original 1960s entry doors with hollow-core construction, non-impact glass lites, and weatherstripping that has long since failed under salt-humidity cycling. The front door is often the last opening homeowners consider, but it’s frequently the weakest point in the building envelope when insurers evaluate wind-borne debris protection. Our Door Installation hub covers the full product range and specification process.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your entry door has a non-impact glass lite, the frame shows corrosion at the threshold, or your insurance inspection flagged the door as non-compliant.
What it costs in Palm Springs
Hurricane-proof front and entry door installation in Palm Springs typically ranges from $1,800 to $3,800 including frame, impact-rated slab or glass lite, hardware, and permit.
How we do it
We measure the existing jamb and rough opening, specify Therma-Tru or ViewLux impact-rated units with proper anchoring into the CBS structure, install with continuous sill pan flashing, and document the assembly rating in your permit package.
French & Double Doors
Signs you need it
Your patio French doors leak at the astragal, the single-pane glass lacks impact rating, or the inactive panel no longer locks securely against wind pressure.
What it costs in Palm Springs
French and double door installation in Palm Springs typically ranges from $2,200 to $4,500 for impact-rated units, with multi-point locking hardware and proper header support figured into the written quote.
How we do it
We evaluate the header span and existing support, specify the French door system from PGT or CGI with impact-rated glass, install with proper shimming and sealant at the CBS opening, and coordinate Palm Beach County inspection for the permit close-out.
What Door Installation Costs in Palm Springs
| Item | Typical range in Palm Springs |
|---|---|
| Hurricane-Proof Front/Entry Door (installed) | $1,800 - $3,800 |
| French/Double Door (impact-rated, installed) | $2,200 - $4,500 |
| Multi-point locking hardware upgrade | $180 - $340 |
Do I need a permit to replace my front door in Palm Springs?
Yes, Palm Beach County Building requires a permit for any entry door replacement that changes the frame or glazing, which includes all impact-rated conversions. We pull the permit and schedule inspection as part of the written scope. Call (561) 286-4734 to start the process.
Can you match my door to the windows you’re already installing?
We specify door and window products from the same manufacturer family where possible, using consistent frame finishes and hardware finishes across the job, and we document the color match on the measured survey. Call (561) 286-4734 to coordinate a full-envelope specification.
Energy-Efficient Windows in Palm Springs
Energy-efficient windows in Palm Springs solve a problem the original 1960s builders never anticipated: single-pane jalousie and aluminum slider assemblies that transmit heat at rates modern codes prohibit, driving cooling loads upward and failing to qualify for many insurer discounts. The same humidity that corrodes frames also degrades the marginal seals these units never had, so the upgrade to Low-E coated, argon-filled, or laminated insulating glass delivers measurable load reduction on equipment that’s already working hard in a subtropical climate. Our Energy-Efficient Windows hub breaks down the performance specifications by product tier.
Low-E & Argon Gas Glass
Signs you need it
Your south- and west-facing rooms stay uncomfortably warm despite the AC running, or your energy bills spike in summer with no change in thermostat setting.
What it costs in Palm Springs
Low-E and argon gas glass packages add $80-$180 per opening to the base window cost, with the upgrade typically paying back in 4-7 years of reduced cooling load.
How we do it
We specify the coating and gas fill from our manufacturer lines based on your orientation and shading conditions, verify the U-factor and SHGC ratings on the NFRC label, and document the performance specifications in your written quote.
Insulated Laminated Glass
Signs you need it
You want both impact protection and thermal performance in one assembly, or your insurer offers a discount for laminated glass that standard impact units don’t qualify for.
What it costs in Palm Springs
Insulated laminated glass windows in Palm Springs typically range from $1,100 to $2,200 per opening, combining the air space of an insulating unit with the interlayer of impact-rated laminated glass.
How we do it
We measure for the heavier unit weight, verify the frame and hardware are rated for the additional load, specify from PGT or ES Windows lines that offer the insulated laminated configuration, and document the full performance data on the measured survey.
What Energy-Efficient Windows Costs in Palm Springs
| Item | Typical range in Palm Springs |
|---|---|
| Low-E/Argon upgrade per opening | $80 - $180 add-on |
| Insulated Laminated Glass Window (installed) | $1,100 - $2,200 |
| ENERGY STAR complete window replacement | $850 - $1,750 |
Will energy-efficient windows lower my electric bill in Palm Springs?
Yes, Low-E and argon-filled units reduce solar heat gain by 40-60% compared to single-pane aluminum, which directly reduces cooling load in Palm Springs’ subtropical climate. Call (561) 286-4734 for a load calculation tied to your specific orientation and shading.
Do energy-efficient windows also satisfy my impact requirement?
Many energy-efficient specifications we offer include impact-rated laminated or insulating laminated glass that carries both the thermal performance and the Florida Product Approval; we specify by what the opening requires, not by what is in stock. Call (561) 286-4734 to review the dual-rated options.
Impact Garage Doors in Palm Springs
Impact garage doors in Palm Springs complete the building envelope protection that insurers now demand, yet the original 1960s installations in this village were typically thin, non-reinforced panels with no wind-load rating and marginal track attachment to the CBS structure. A garage door failure in a 140+ mph wind event pressurizes the entire house, which is why Citizens Insurance and private carriers are increasingly including garage doors in their inspection criteria alongside windows and entry doors. Our Impact Garage Doors hub details the wind-load specifications and product lines.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a wind-load sticker, the track is attached with minimal fasteners into the CBS header, or your insurance inspection specifically flagged the garage door.
What it costs in Palm Springs
Hurricane-rated garage door installation in Palm Springs typically ranges from $1,600 to $3,200 for a single-car opening, and $2,400 to $4,800 for a double-car opening, including reinforced track, heavy-duty hardware, and permit.
How we do it
We measure the opening and evaluate the header and jamb attachment points, specify a wind-load-rated door system from our manufacturer lines with the proper design pressure rating for your exposure category, install with reinforced track and upgraded fasteners, and document the rating label in the photo record.
Wind-Load Code Compliance
Signs you need it
You’re replacing any garage door in Palm Beach County’s wind-borne debris region, or your permit application requires documentation of compliance with the Florida Building Code wind-load chapter.
What it costs in Palm Springs
Wind-load code compliance upgrades add $200-$450 to the base door cost for reinforced struts, upgraded track gauge, and additional fasteners into the CBS structure.
How we do it
We verify the design wind speed for your Palm Springs exposure, specify the door and hardware to meet or exceed that rating, install with the fastening pattern required by the Florida Building Code, and provide the product approval documentation for permit close-out.
What Impact Garage Doors Costs in Palm Springs
| Item | Typical range in Palm Springs |
|---|---|
| Hurricane-Rated Single Garage Door (installed) | $1,600 - $3,200 |
| Hurricane-Rated Double Garage Door (installed) | $2,400 - $4,800 |
| Wind-Load Code Compliance Upgrade | $200 - $450 add-on |
Does my garage door need to be impact-rated if my windows already are?
Yes, Palm Beach County’s wind-borne debris region requires protection of all openings including garage doors, and many insurers now enforce this explicitly; a non-compliant garage door can trigger the same non-renewal as non-impact windows. Call (561) 286-4734 to evaluate your current door’s rating.
Can you install a hurricane-rated garage door on my existing track?
We evaluate the existing track gauge, fastener pattern, and header condition during the measured survey; most Palm Springs installations require upgraded track and additional fasteners into the CBS structure to meet the wind-load rating. Call (561) 286-4734 for a written assessment.
Custom & Geometric Windows in Palm Springs
Custom and geometric windows in Palm Springs solve the architectural mismatch that occurs when modern impact-rated products meet the irregular openings of 1960s design: arched transoms, circular accent windows, and oversized living-room picture windows that were never standardized dimensions. The CBS rough openings in this village’s housing stock often include shapes and spans that require templated fabrication rather than stock units, and the permit documentation must show that the custom product carries the same Florida Product Approval as standard rectangles. Our Custom & Geometric Windows hub explains the templating and approval process.
Geometric & Shaped Windows
Signs you need it
Your home has arched, circular, triangular, or trapezoidal windows that need replacement, or you’re adding a shaped accent opening that must match the impact rating of your standard windows.
What it costs in Palm Springs
Geometric and shaped window installation in Palm Springs typically ranges from $1,400 to $3,200 per opening, with the template and custom fabrication accounting for 30-40% of the cost above a standard rectangular unit.
How we do it
We create a physical template of your existing opening or the new rough opening, submit it to the manufacturer for custom fabrication with impact-rated laminated glass, receive the unit with Florida Product Approval documentation, and install with adapter framing as needed for the CBS structure.
Oversized Openings
Signs you need it
Your living room or master bedroom has a picture window exceeding 60 square feet, the existing glass is single-pane with no impact rating, or the frame shows deflection under wind load.
What it costs in Palm Springs
Oversized window installation in Palm Springs typically ranges from $2,200 to $4,500 per opening, with structural engineering review and permit documentation included in the written scope.
How we do it
We measure the span and evaluate the header support, specify a reinforced frame system from ViewLux or Mr-Glass rated for the width and design pressure, coordinate structural engineering stamps when required by Palm Beach County Building, and document the installation with the standard photo record.
What Custom & Geometric Windows Costs in Palm Springs
| Item | Typical range in Palm Springs |
|---|---|
| Geometric/Shaped Window (custom, installed) | $1,400 - $3,200 |
| Oversized Window (engineered, installed) | $2,200 - $4,500 |
| Template and custom fabrication | $320 - $680 add-on |
How long does custom window fabrication take?
Custom and geometric windows typically require 4-6 weeks from template to delivery, with permit submission running in parallel; we schedule installation within 48 hours of delivery to minimize exposure. Call (561) 286-4734 to template your opening and confirm current lead times.
Do custom windows still qualify for insurance discounts?
Yes, we specify custom shapes from manufacturer lines that carry Florida Product Approval or Miami-Dade approval, and the permit documentation we provide includes the same rating certificates as standard units. Call (561) 286-4734 to verify the approval path for your specific shape and size.
Brands We Service in Palm Springs
We install and service eight verified manufacturer lines in Palm Springs: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. We stock common hardware, weatherstripping, and glass packages locally through our Miami coordination office, which keeps most repair and replacement turnarounds under two weeks. See our brands for the full specification guide by performance tier and price range.
Pricing for Windows & Doors in Palm Springs, FL
| Service | Typical range in Palm Springs |
|---|---|
| Single/Double Hung Window (impact-rated) | $650 - $1,400 |
| Horizontal Roller Window (impact-rated) | $720 - $1,550 |
| Low-E/Argon Glass Upgrade | $80 - $180 add-on |
| Insulated Laminated Glass Window | $1,100 - $2,200 |
| ENERGY STAR Window Replacement | $850 - $1,750 |
| Hurricane-Proof Entry Door | $1,800 - $3,800 |
| French/Double Door (impact-rated) | $2,200 - $4,500 |
| Hurricane-Rated Single Garage Door | $1,600 - $3,200 |
| Hurricane-Rated Double Garage Door | $2,400 - $4,800 |
| Geometric/Shaped Custom Window | $1,400 - $3,200 |
| Oversized Engineered Window | $2,200 - $4,500 |
| Custom Adapter Framing per Opening | $120 - $280 |
Prices push toward the upper end in Palm Springs when the existing CBS rough opening requires extensive adapter framing, when structural engineering is required for oversized spans, or when the job is scheduled under insurance cure-notice urgency that demands permit expediting. The written quote you receive before any work starts is the final invoice - Haven Clause 1, no change orders.
Neighborhoods We Serve in Palm Springs
We work throughout Palm Springs’ compact residential grid, with crews dispatched from our Miami office and routed to minimize travel time across the village. Response to initial calls is same-day or next-day for measured surveys.
- Greenway Village South
- Greenway Village North
- Palm Springs Village
- Lake Clarke Gardens area
- Congress Park vicinity
Service Area - Cities Near Palm Springs
Our crews serve the full Palm Beach County corridor and adjacent communities, with dispatch coordinated from our Miami office. Nearby cities we work regularly include Belle Glade, FL, South Bay, FL, Pahokee, FL, and Clewiston, FL to the west, with the same measured survey process and written-price guarantee applied to every job.
Serving Palm Springs, FL - Our Local Coverage Area
We’re based in the Palm Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Palm Springs
We schedule measured surveys within 24-48 hours of contact, submit permits to Palm Beach County Building immediately upon quote acceptance, and sequence fabrication and installation to meet 30-90 day cure deadlines. Call (561) 286-4734 with your notice date and we’ll confirm the timeline in writing.
Some Palm Springs neighborhoods require HOA architectural review before permit submission; we include the product data sheets and color samples in your application package, and we don’t start work until both HOA and building permits are released. Call (561) 286-4734 and we’ll verify your specific HOA requirements.
Palm Beach County Building requires permits for all window and door replacements that change the frame, glazing, or operability, with inspection after installation and before final close-out; we pull all permits and schedule inspections as standard scope on every job. Call (561) 286-4734 to confirm the permit sequence for your specific project.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Palm Springs Customers Say
"The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F."Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R.