Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Lake Park, FL
Window and door installation in Lake Park runs $380-$1,400 per opening depending on product tier and structural condition, with most CBS homes from the 1950s-1970s requiring additional frame prep that inland Palm Beach County properties rarely need. We measure every opening to the sixteenth, write the price before any work starts, and leave a documented photo record under the Haven Standard. Call (561) 286-4734 to schedule your free measured survey.
Our crews coordinate dispatch from our Miami office and serve Lake Park locally, carrying PGT, CGI, and ECO Window Systems product lines specified by what your opening requires rather than what sits in a warehouse. The salt air at this distance from the Intracoastal destroys hardware and frames years ahead of manufacturer estimates, so we specify stainless steel fasteners and marine-grade finishes as standard on Lake Park jobs, not as upgrades.
Why Lake Park Homes Are Different
Lake Park is one of Palm Beach County’s oldest incorporated municipalities, and the bulk of its residential neighborhoods consist of post-WWII through 1970s CBS (concrete block structure) homes that still carry original jalousie windows, early single-pane aluminum frames, and hollow-core exterior doors - none of which meet Florida’s current impact-rated opening protection requirements. Because the town’s eastern edge sits directly on the Intracoastal Waterway (often within a quarter mile), salt air corrosion destroys frames, hardware, and weatherstripping years faster here than in inland Palm Beach County suburbs, making full window and door replacement both a code-compliance urgency and a near-constant maintenance reality for Lake Park homeowners.
Most Lake Park homes were built in the 1950s-1970s as modest CBS ranch houses, and a high proportion still have original jalousie (louvered glass) windows or early mill-finish aluminum single-pane units - construction types that are non-impact-rated, chronically leaky, and energy-inefficient. This aging stock creates a dense replacement market compared to newer suburbs like Palm Beach Gardens a few miles north. Local contractors know that pulling a permit to replace even a single window in one of Lake Park’s older jalousie-equipped homes can trigger a whole-house opening-protection compliance review under the Florida Building Code - meaning a homeowner who starts with one bad window can quickly find themselves required to address every non-impact opening in the structure. With the Intracoastal Waterway forming Lake Park’s eastern border and the Atlantic roughly two to three miles away, the entire town sits in a high salt-spray exposure zone that rapidly corrodes aluminum frames, zinc die-cast hardware, and steel hinge screws - shortening window and door lifespans well below manufacturer estimates. Palm Beach County’s coastal wind-speed designation also means all permitted window and door work must meet Florida Building Code impact or protection standards, adding cost and scope to even basic replacements.
Our Main Lake Park Services
Most Lake Park homeowners who call us start with one of these three needs:
Window Replacement in Lake Park
We replace original jalousie and single-pane aluminum windows in Lake Park’s older CBS homes with impact-rated or energy-efficient units that satisfy Florida Building Code compliance reviews. Every job begins with a measured survey you keep, and the written quote matches that document exactly - Haven Clause 1. Window Replacement in Lake Park covers full-frame and insert installations across all eight manufacturer lines we carry.
Impact Windows & Doors in Lake Park
Lake Park’s coastal wind-speed zone requires impact-rated opening protection on all permitted replacements, and many homeowners discover they need whole-house compliance once the first permit is pulled. We specify PGT, CGI, or ES Windows impact products by performance tier and price range, with the written price established before any work starts. Impact Windows & Doors in Lake Park details our full impact-rated product range.
Sliding & Patio Doors in Lake Park
The salt-corroded rollers and leaking frames we find in Lake Park patio doors typically trace back to original 1960s-1970s installations with non-marine hardware. We replace these with impact-rated sliding systems using stainless steel rollers and marine-grade thresholds, measured to your existing rough opening. Sliding & Patio Doors in Lake Park covers single-panel through multi-panel configurations.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Lake Park
Window installation in Lake Park typically involves removing original jalousie or early aluminum single-pane units from 1950s-1970s CBS construction and replacing them with impact-rated or energy-efficient windows that satisfy Florida Building Code compliance. The salt-spray zone accelerates frame and hardware failure, so we specify marine-grade fasteners and stainless steel components as standard, not upgrades. Window Installation covers our full measurement and specification process.
Single & Double Hung Windows
Signs you need it
Your jalousie windows leak during summer thunderstorms, the aluminum frames show white corrosion bloom, or you received a code-compliance notice after a neighbor’s permit triggered a block inspection.
What it costs in Lake Park
Single and double hung window installation in Lake Park runs $420-$780 per opening for vinyl-framed impact-rated units, with frame reconstruction for deteriorated CBS openings adding $180-$340.
How we do it
We measure the rough opening to the sixteenth, document existing frame condition with photos you receive, install the new unit with stainless steel fasteners and marine-grade sealant, then pressure-test and photograph the completed installation.
Horizontal Roller Windows
Signs you need it
The rollers grind or stick, you feel air infiltration along the sash track, or the original anodized finish has chalked to a powdery white from salt exposure.
What it costs in Lake Park
Horizontal roller window installation in Lake Park ranges $480-$860 per opening for impact-rated vinyl or aluminum units, with sill reconstruction for corroded substrates adding $220-$380.
How we do it
We remove the existing unit, assess sill and jamb condition, install the new roller window with stainless steel hardware and dual-fin weatherstripping, then operate-test and document sightline alignment.
What Window Installation Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Single/Double Hung (impact-rated vinyl) | $420-$780 per opening |
| Horizontal Roller (impact-rated) | $480-$860 per opening |
| Frame/sill reconstruction (salt-damaged CBS) | $180-$380 per opening |
Will one window replacement trigger whole-house compliance in Lake Park?
Yes, if your home still has original non-impact jalousie or single-pane aluminum windows, pulling a permit for even one replacement can trigger a Florida Building Code review requiring all openings to meet current impact standards. We identify this risk during our free measured survey and scope the full compliance path in writing before you commit.
How long does window installation take in Lake Park?
Most single-opening replacements finish in one day; whole-home installations on typical Lake Park CBS ranches run 2-4 days depending on opening count and frame condition. We schedule start dates only after permits are approved and materials are on-site, so the crew arrives once and completes without interruption.
Door Installation in Lake Park
Door installation in Lake Park means replacing hollow-core exterior doors and corroded steel frames from 1950s-1970s CBS construction with impact-rated units that satisfy Florida Building Code and withstand salt-air degradation. The original zinc die-cast hardware and steel hinge screws we remove are typically frozen or crumbling from Intracoastal exposure. Door Installation details our full specification and measurement process.
Entry Doors
Signs you need it
Your steel door shows rust bloom at the bottom edge, the frame is no longer square in the CBS opening, or you can see daylight around the weatherstripping.
What it costs in Lake Park
Entry door installation in Lake Park runs $680-$1,200 for fiberglass or steel impact-rated units with composite frames, with CBS frame reconstruction adding $240-$420.
How we do it
We measure the rough opening plumb and square, remove the deteriorated unit, install the new pre-hung door with stainless steel hinges and marine-grade sealant, then verify latch engagement and weatherstripping compression.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your current door lacks a Miami-Dade NOA or Florida Product Approval, or you received a notice of non-compliance after a permit was pulled on a neighboring property.
What it costs in Lake Park
Hurricane-proof entry door installation in Lake Park ranges $840-$1,400 for large-missile impact-rated fiberglass or steel units with laminated glass sidelites.
How we do it
We specify the door and glazing by design pressure rating for your Lake Park wind zone, pull permits with product approval documentation, install with structural fasteners per manufacturer details, and schedule inspection before final trim.
What Door Installation Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Entry door (impact-rated fiberglass/steel) | $680-$1,200 |
| Hurricane-proof entry door with sidelites | $840-$1,400 |
| CBS frame reconstruction | $240-$420 |
Do I need a permit to replace my front door in Lake Park?
Yes, all exterior door replacements in Palm Beach County require a permit, and Lake Park’s coastal wind-speed zone means the new door must carry Florida Product Approval or Miami-Dade NOA documentation. We pull permits and schedule inspections as standard scope on every door installation.
Can you match my door to the original 1960s style?
Therma-Tru and ViewLux both manufacture fiberglass entry doors with mid-century panel profiles that satisfy modern impact ratings while preserving the original aesthetic. We bring sample slabs and glass options to the measured survey so you see the product before the price is written.
Energy-Efficient Windows in Lake Park
Energy-efficient window installation in Lake Park addresses the chronic thermal loss and solar heat gain from original single-pane aluminum and jalousie windows in 1950s-1970s CBS homes, where uninsulated glass accounts for 25-40% of cooling load. The salt-corroded frames we remove are typically beyond weatherstripping repair, making full replacement the only path to measurable efficiency improvement. Energy-Efficient Windows covers our full glazing specification process.
Low-E & Argon Gas Glass
Signs you need it
Your west- and south-facing rooms overheat by mid-afternoon, your AC runs continuously, or you feel radiant heat through the glass even when the frame is cool.
What it costs in Lake Park
Low-E argon-filled window installation in Lake Park runs $460-$820 per opening for vinyl-framed double-pane units, with impact-rated Low-E options at $580-$980.
How we do it
We calculate orientation-specific solar heat gain coefficients, specify soft-coat Low-E with argon fill by exposure, and verify U-factor and SHGC performance with manufacturer documentation you receive.
ENERGY STAR Replacement Windows
Signs you need it
Your current windows predate the 2009 ENERGY STAR version 5.0 criteria, or you are replacing units that failed to qualify for utility rebate programs due to excessive U-factor.
What it costs in Lake Park
ENERGY STAR certified window installation in Lake Park ranges $520-$920 per opening for qualifying vinyl or composite frame units with Low-E and argon fill.
How we do it
We verify ENERGY STAR certification by climate zone, confirm the NFRC label data, install with complete air-sealing detail, and provide the documentation needed for any available utility incentive.
What Energy-Efficient Windows Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Low-E argon double-pane (non-impact) | $460-$820 per opening |
| Low-E argon impact-rated | $580-$980 per opening |
| ENERGY STAR certified replacement | $520-$920 per opening |
Will energy-efficient windows actually lower my electric bill in Lake Park?
Yes, replacing single-pane aluminum windows with Low-E argon units typically reduces cooling load 15-25% in Lake Park’s 1950s-1970s CBS construction, with payback periods of 6-10 years depending on current usage and FPL rate tier. We calculate estimated annual savings during the measured survey and include the projection in your written scope.
Do I still need impact-rated windows if I choose energy-efficient?
In Lake Park’s coastal wind-speed zone, all replacement windows must either be impact-rated or have approved hurricane shutters installed per Florida Building Code; energy efficiency and impact protection are separate performance characteristics. We specify products that satisfy both requirements, such as ECO Window Systems impact-rated Low-E units, with performance data documented in writing.
Impact Garage Doors in Lake Park
Impact garage door installation in Lake Park protects the largest opening in most CBS homes from wind-borne debris and pressure differentials that can blow out the door and compromise the roof structure. The original non-rated steel or wood doors we replace on 1950s-1970s homes typically lack the reinforcement, track hardware, and jamb attachment needed for coastal wind zones. Impact Garage Doors covers our full wind-load engineering process.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a wind-load sticker, the panels rattle in ordinary thunderstorms, or your insurance inspection noted non-compliance with opening protection requirements.
What it costs in Lake Park
Hurricane-rated garage door installation in Lake Park runs $1,200-$2,400 for single-car steel or aluminum impact-rated units with reinforced tracks, with double-car openings at $1,800-$3,200.
How we do it
We calculate required design pressure by opening size and wind zone, specify the door and track system with Miami-Dade NOA or Florida Product Approval, and install with structural attachment to the CBS header and jambs per engineering detail.
Wind-Load Code Compliance
Signs you need it
You received a code violation notice, your permit application for other work triggered a garage door inspection, or you are selling and the buyer’s inspection flagged non-compliant opening protection.
What it costs in Lake Park
Wind-load code compliance retrofit in Lake Park ranges $380-$720 for reinforcing existing compliant doors with upgraded track and hardware, or full replacement if the door itself is non-rated.
How we do it
We inspect the existing door, track, and jamb attachment, engineer the reinforcement or replacement to meet Lake Park’s specific wind-speed requirement, pull permits with structural details, and schedule inspection before final release.
What Impact Garage Doors Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Hurricane-rated single-car garage door | $1,200-$2,400 |
| Hurricane-rated double-car garage door | $1,800-$3,200 |
| Wind-load compliance retrofit (track/hardware) | $380-$720 |
Does my garage door need to be impact-rated if I have shutters on my windows?
Yes, Florida Building Code treats each opening independently; shutters on windows do not satisfy the garage door requirement, and the garage door is typically the largest opening in the structure. We assess the door’s current rating and provide a written scope for compliance or replacement.
Can you reinforce my existing garage door or does it need full replacement?
Some structurally sound doors can be brought into compliance with reinforced track, heavy-duty hardware, and wind-load struts, but many pre-1990s Lake Park doors lack the panel integrity to pass impact testing regardless of hardware upgrades. We inspect and document the condition, then specify the most economical compliant path in writing.
Custom & Geometric Windows in Lake Park
Custom and geometric window installation in Lake Park replaces the fixed jalousie banks and shaped openings found in 1950s-1970s ranch and Florida modern homes with impact-rated or energy-efficient units that preserve the original architectural intent. The irregular rough openings we encounter in these older homes rarely accommodate standard stock sizes, requiring measured fabrication and field-fit installation. Custom & Geometric Windows covers our full templating and specification process.
Geometric & Shaped Windows
Signs you need it
Your triangular, trapezoid, or octagonal windows are single-pane with deteriorated glazing compound, or you need to replace a shaped fixed unit with an operable impact-rated alternative.
What it costs in Lake Park
Geometric shaped window installation in Lake Park runs $680-$1,400 per opening depending on complexity, with impact-rated laminated glass adding $180-$340 to base fabrication cost.
How we do it
We template the existing opening with digital angle measurement, fabricate the custom unit to specification with marine-grade frame finish, and install with field-cut shimming and structural attachment per the approved detail.
Arched & Curved Windows
Signs you need it
Your arched window has separated glazing, the curved frame shows salt corrosion at the spring line, or you want to replace a fixed arch with a functioning casement or awning unit.
What it costs in Lake Park
Arched window installation in Lake Park ranges $840-$1,600 for custom-fabricated vinyl or aluminum units, with curved laminated glass and radius frame construction at the upper end.
How we do it
We measure the spring line, radius, and rise to the sixteenth, specify the curved frame and glazing from Mr-Glass or custom PGT capability, and install with continuous sealant bead and stainless steel attachment at the jambs and sill.
What Custom & Geometric Windows Costs in Lake Park
| Item | Typical range in Lake Park |
|---|---|
| Geometric shaped window (triangle, trapezoid, octagon) | $680-$1,400 per opening |
| Arched or curved window | $840-$1,600 per opening |
| Impact-rated laminated glass upgrade (custom) | $180-$340 per opening |
How long does custom window fabrication take for Lake Park homes?
Custom geometric and arched windows typically require 4-6 weeks from templated measurement to delivery, with complex curved units at the longer end. We template during the initial measured survey, write the price with delivery timeline included, and schedule installation only after factory inspection and transit to our local staging.
Can you match the custom windows in my 1960s Lake Park home?
Yes, we template existing units and fabricate replacements that preserve the original sightline and proportion while upgrading to current impact or energy performance; many Lake Park homeowners replace fixed jalousie banks with geometric fixed or operable units that maintain the mid-century aesthetic. We bring sample profiles and glass options to the survey for your approval before the price is written.
Brands We Service in Lake Park
We specify from eight manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - by performance tier and price range, not by margin. Our crews carry common hardware, weatherstripping, and marine-grade fasteners for ES Windows, ECO Window Systems, and Therma-Tru products locally, with most repair and adjustment visits completed in one trip. our brands
Pricing for Windows & Doors in Lake Park, FL
| Service | Typical range in Lake Park |
|---|---|
| Single/Double Hung Window (impact vinyl) | $420-$780 per opening |
| Horizontal Roller Window (impact) | $480-$860 per opening |
| Low-E Argon Window (non-impact) | $460-$820 per opening |
| Low-E Argon Window (impact-rated) | $580-$980 per opening |
| ENERGY STAR Certified Window | $520-$920 per opening |
| Entry Door (impact fiberglass/steel) | $680-$1,200 |
| Hurricane-Proof Entry Door with Sidelites | $840-$1,400 |
| Geometric Shaped Window | $680-$1,400 per opening |
| Arched/Curved Window | $840-$1,600 per opening |
| Hurricane-Rated Single-Car Garage Door | $1,200-$2,400 |
| Hurricane-Rated Double-Car Garage Door | $1,800-$3,200 |
| CBS Frame/Sill Reconstruction | $180-$420 per opening |
Prices in Lake Park run higher than inland Palm Beach County for two reasons: salt-damaged CBS frames require reconstruction before new units can be secured, and all permitted work must include Florida Product Approval or Miami-Dade NOA documentation for the coastal wind-speed zone. The price we write after our measured survey is the price on the final invoice - Haven Clause 1, no surprises.
Neighborhoods We Serve in Lake Park
We serve the full Lake Park municipality and surrounding unincorporated areas, with crews dispatched from our Miami office for scheduled appointments. Most Lake Park addresses receive next-available scheduling within 3-5 business days of measured survey completion.
- Kelsey Park
- Lake Park Historic District
- Paradise Cove
- Rolling Green
- Sunset Shores
Service Area - Cities Near Lake Park
Our crews serve the full Palm Beach County coastal corridor and western communities from our Miami office, with regular installation routes through Belle Glade, FL, South Bay, FL, Pahokee, FL, and Clewiston, FL. We do not charge travel fees within our stated service area, and all locations receive the same upfront pricing and Haven Standard documentation.
Serving Lake Park, FL - Our Local Coverage Area
We’re based in the Lake Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Lake Park
Yes, all window and door replacements in Lake Park require a Palm Beach County permit, and replacing even one window in a home with original non-impact openings can trigger a whole-house compliance review under Florida Building Code. We pull permits, schedule inspections, and include all fees in your written scope - no separate invoices or surprise holds.
Most Lake Park projects start 2-3 weeks after quote approval, with custom or geometric units requiring 4-6 additional weeks for fabrication. We do not schedule installation until permits are approved and materials are confirmed on-site, so the crew arrives once and completes without interruption.
You receive the final measured survey, the completed scope with line-item pricing, manufacturer warranty registrations, permit closure documentation, and a dated photo record of installation details - all under the Haven Standard’s Evidence on Every Job clause. The 365-Day Done Right Promise is stamped on every completion document, not offered separately.
Call (561) 286-4734 to schedule your free measured survey. We’ll write the price before any work starts, and it won’t change.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Park Customers Say
"Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.