Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterSliding & Patio Door Installation & Replacement in Boynton Beach, FL
A new sliding or patio door in Boynton Beach typically runs $2,800-$6,500 installed for a standard 6-foot opening, with impact-rated units starting around $4,200. Most replacements in the city’s 55+ communities require both HOA architectural approval and a Palm Beach County building permit, adding 2-4 weeks to the timeline before the first tool is lifted. Call (561) 286-4734 to schedule your free measured survey, and we’ll hand you the written price before any work starts.
Why Boynton Beach’s Retirement Communities Need a Different Kind of Door Contractor
Boynton Beach’s extraordinary density of 1960s-1980s age-restricted communities, Leisureville, Aberdeen, Hunters Run, and dozens of others, means thousands of units still carry original jalousie or single-pane aluminum-frame openings that are completely non-compliant with Florida’s current wind-borne debris requirements. Every job here requires a dual navigation: Palm Beach County building-permit and inspection sign-off AND the community’s architectural review board approval. Frame color, style, and finish are tightly controlled by HOA covenants, a layer of bureaucracy that doesn’t exist in the city’s newer, non-deed-restricted neighborhoods near Ocean Avenue or along the Intracoastal.
In Leisureville, we replaced three 1970s aluminum sliders whose tracks had rotted into the CBS slab, water had been backing under the jamb for years. Because the HOA controls frame color and style, we first got the board’s sign-off on a bronze impact-rated slider, then pulled the Palm Beach County permit and shot the opening for a zero-threshold sill so the client could cross it without a step. The low-E insulated glass units cut that villa’s afternoon heat load immediately, and the same spec is now approved for the neighboring units. That single HOA-approved sliding-door spec often snowballs into 40-60 identical jobs on the same block once clubhouse word-of-mouth starts. We have seen it happen on Hypoluxo Road corridors and inside Aberdeen’s villa clusters.
Boynton Beach sits in Palm Beach County, just outside Miami-Dade/Broward’s High-Velocity Hurricane Zone, so windows and doors require Florida Product Approval (FL number) but not Miami-Dade NOA. Hurricane Frances made direct landfall on Palm Beach County in 2004, and the resulting insurance market collapse has driven carriers to demand wind-mitigation documentation, making impact-rated replacements a near-financial necessity rather than a luxury upgrade. The dominant stock is low-rise CBS condos and single-family villas built between roughly 1965 and 1985, most with original louvered jalousie or single-hung aluminum windows that have no meaningful hurricane protection. Newer infill and eastern waterfront construction skews toward impact-rated, high-end product, but the retirement-community retrofit market is the city’s largest volume segment.
Our Sliding & Patio Doors Services in Boynton Beach
Impact Sliding Glass Doors
Impact sliding glass doors in Boynton Beach start around $4,200 for a standard 72-by-80-inch opening and run to $7,800 for larger multi-panel systems. We specify from our Sliding & Patio Doors product lines, ECO Window Systems and Mr-Glass among them, matched to the opening’s exposure and the HOA’s aesthetic requirements. Every unit carries Florida Product Approval, and we document the wind-borne debris rating on the written quote you keep. For Leisureville and Aberdeen residents, we maintain a running library of pre-approved specs to cut the architectural review timeline.
Sliding Glass Door Replacement
Replacement of existing sliders in Boynton Beach’s 55+ communities almost always means full demo to the rough opening. Original jalousie or single-pane aluminum sliders cannot be retrofitted or reinforced into compliance; attempts to reglaze or brace them fail inspection and leave the unit non-compliant. The typical replacement runs $3,200-$5,800 depending on size, wall condition, and whether the CBS slab needs remediation from years of track-rot water intrusion. We shoot the opening with a laser level, note any threshold drainage issues, and specify the fix in writing before ordering product.
Patio Doors
Standard patio door installations in Boynton Beach’s newer construction or non-deed-restricted neighborhoods near Woolbright Road range from $2,800-$4,500 for non-impact vinyl or aluminum units, and $4,500-$6,500 for impact-rated. We stock Therma-Tru and ViewLux lines specified by performance tier, not by what is in our warehouse. The measured survey you receive at the first visit becomes your written quote; the two documents are identical under Haven Clause 1.
Impact French Patio Doors
Impact French patio doors for Boynton Beach villas and single-family homes typically run $5,500-$9,000 installed, with hardware and screen options priced separately on the written scope. These units are popular in Hunters Run and newer infill where the HOA permits divided-lite or traditional styling. We pull the Palm Beach County permit, coordinate inspection, and leave a documented photo record of the completed installation under Haven Clause 4.
Screen Door Installation
Screen doors for Boynton Beach sliders range $380-$720 depending on frame material and mesh grade. We measure to the existing slider’s operating clearance and specify the screen on the same written quote as the primary door, or as a standalone repair.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Boynton Beach
We draw from eight verified manufacturer lines for Sliding & Patio Doors in Boynton Beach: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. For Boynton Beach’s retirement-community market, we maintain local inventory of ECO Window Systems and Mr-Glass impact-rated sliders in the neutral and bronze finishes most commonly approved by Leisureville and Aberdeen architectural boards. Therma-Tru and ViewLux lines are stocked for higher-end waterfront and custom applications east of Federal Highway. Every product is specified by what the opening requires, measured to the sixteenth, and priced in writing before any deposit is taken.
Common Sliding & Patio Doors Problems We See in Boynton Beach Homes
- Original jalousie or single-pane aluminum sliders that cannot be retrofitted. In Leisureville and Aberdeen, these openings must be fully demoed to the rough opening and rebuilt with impact-rated product. Attempts to reglaze or brace them fail Palm Beach County inspection and leave the unit non-compliant with wind-borne debris rules.
- Rotted or corroded tracks and thresholds that no longer drain. Water wicks under the jamb and into the CBS slab, causing progressive damage that we document with photos before quoting the remediation. This is the most common hidden cost in 1970s-era villa replacements.
- HOA architectural review board rejections after product is ordered. Homeowners in deed-restricted communities sometimes purchase a slider based on a showroom sample, only to learn the frame color, finish, or style violates covenant. We get board sign-off first, then order, under Haven Clause 3’s verified-crew protocol.
- Non-impact sliders that trigger insurance non-renewal. Since the 2004 hurricane season, Boynton Beach carriers increasingly require wind-mitigation documentation for sliding doors; non-impact units can result in premium increases or coverage cancellation.
Pricing for Sliding & Patio Doors in Boynton Beach, FL
| Service | Typical Range in Boynton Beach |
|---|---|
| Standard patio door (non-impact, vinyl/aluminum) | $2,800 - $4,500 |
| Impact sliding glass door (single 6-ft opening) | $4,200 - $6,500 |
| Impact sliding glass door (8-ft or multi-panel) | $5,800 - $7,800 |
| Sliding glass door replacement (full demo, standard size) | $3,200 - $5,800 |
| Impact French patio door | $5,500 - $9,000 |
| Screen door (standalone or paired) | $380 - $720 |
| CBS slab remediation (track-rot water damage) | $800 - $2,400 |
What moves the price: wall condition behind the existing unit, whether the rough opening needs reframing, threshold height and zero-threshold conversion, hardware grade, and the specific HOA-mandated finish. We do not quote from photos or descriptions; Haven Clause 1 requires a measured survey that you keep, and the written price cannot differ from that document. Bring us a competitor’s written estimate and we will review it at no charge under our Free Second Opinion policy.
We Also Serve Cities Near Boynton Beach
Our crews work throughout Palm Beach County from the brand’s Miami (South FL) office, with local dispatch to Greenacres, Lake Worth, West Palm Beach, and Wellington. Each city carries its own permit requirements and HOA landscapes; we maintain separate spec libraries for Wellington’s equestrian-estate covenants and Lake Worth’s historic-district guidelines. The same Haven Standard governs every opening.
Serving Boynton Beach, FL - Our Local Coverage Area
We’re based in the Boynton Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Boynton Beach
Yes. In Boynton Beach’s deed-restricted 55+ communities, the HOA architectural review board must sign off on frame color, style, and finish before Palm Beach County will accept the permit application. We handle both sequences: board submittal first, then county filing, with the approved spec attached to your written quote. Call (561) 286-4734 to schedule the measured survey that starts the process.
No. Jalousie windows and doors, the louvered glass panels common in 1960s-70s Florida retirement construction, cannot be retrofitted or reinforced into wind-borne debris compliance. The only code-legal path is full demo to the rough opening and installation of a new impact-rated unit. We have seen homeowners in Boynton Beach waste money on bracing attempts that failed inspection; the measured survey we provide shows exactly what the opening requires.
Florida Product Approval (FL number) is sufficient. Boynton Beach is in Palm Beach County, outside the High-Velocity Hurricane Zone that requires Miami-Dade NOA. This distinction affects which product lines are code-legal here; we specify only FL-approved units on every Boynton Beach quote. Call (561) 286-4734 for an exact quote - estimates are free.
Yes. A zero-threshold sill eliminates the step-over that becomes a trip hazard and a barrier for walkers or wheelchairs. In Boynton Beach’s 55+ communities, we regularly specify these for aging-in-place retrofits, though the HOA must approve the exterior profile and the slab may need regrading for drainage. The field vignette from Leisureville shows the full sequence: board approval, county permit, zero-threshold shoot, immediate heat-load reduction.
It can. Since Hurricane Frances in 2004, Boynton Beach carriers have increasingly required wind-mitigation documentation for all exterior openings. Replacing a non-impact slider with a Florida Product Approved impact-rated unit typically generates the wind-mitigation credits that reduce premiums. We document the installation with photos and product approval numbers that your agent can submit. Call (561) 286-4734 to schedule the survey and receive the written scope that supports your mitigation filing.
Call (561) 286-4734 to schedule your free measured survey. We will hand you the written price before any work starts, and every job is covered by our 365-Day Done Right Promise under the Haven Standard.
Written by Sonia Raman, Owner at Sightline Windows & Doors, serving Boynton Beach since 2012 under the Haven Standard.