Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in The Acreage, FL
Window installation in The Acreage typically runs $650-$1,400 per opening for standard vinyl or aluminum units, and $1,800-$3,200 for impact-rated replacements, with most full-home retrofits requiring 18 to 35 openings on these large-lot custom homes. Most homes here were built in the 1980s and 1990s with oversized aluminum-frame, single-pane windows and multi-panel sliding glass doors that are now decades past their useful life and well short of current Florida Building Code impact standards. We measure every opening on-site, produce a written scope the customer keeps, and the quoted price is the final price. Call (561) 286-4734 to schedule your free measured survey.
Why The Acreage Homes Are Different
The Acreage sits on the western edge of Palm Beach County, pressed against the Loxahatchee wetlands, and carries some of the highest ground-level humidity readings in the county. That moisture accelerates wood rot in door frames, sill pans, and rough openings on homes that were often built with minimal moisture barriers in the 1980s and 1990s. The housing stock is almost entirely CBS construction on 1.25-acre or larger lots, with expansive window walls and multi-panel sliding glass door assemblies original to construction.
Because The Acreage is unincorporated, there is no city building department. Every window and door permit routes through Palm Beach County’s Building Division in West Palm Beach, and inspection scheduling for these far-western rural addresses routinely adds one to three extra days compared to coastal cities. Contractors who do not plan for this lag create scheduling chaos. We build that buffer into every timeline we write.
The area also sits within the wind-borne debris region and takes direct inland wind loading from Atlantic hurricanes tracking up the Florida peninsula. The original jalousie windows, picture windows, and sliding glass doors installed before the county’s current impact-resistance standards are now a code-compliance and insurance issue, not merely an efficiency problem.
Our Main The Acreage Services
Homeowners in The Acreage call us most often for full-home window replacement and impact-rated retrofits. These are the two services that dominate our measured surveys here.
Window Replacement in The Acreage
We replace aging aluminum-frame, single-pane windows with modern impact-rated or energy-efficient units, measured to the exact rough opening. The Acreage’s 1980s and 1990s custom homes often feature oversized picture windows and jalousie assemblies that are now obsolete; we specify replacements from PGT, CGI, or CWS that fit the original sightline without structural modification. Every job leaves a documented photo record. Window Replacement in The Acreage covers our full process.
Impact Windows & Doors in The Acreage
Full-home impact retrofits are the most common job we quote in The Acreage, where pre-2002 construction predates current wind-borne debris requirements. We specify laminated glass and reinforced frames from ES Windows or Mr-Glass, pull permits through Palm Beach County’s Building Division, and schedule inspections with the rural-address buffer built in. Impact Windows & Doors in The Acreage details the product tiers and code path.
Sliding & Patio Doors in The Acreage
The Acreage’s original multi-panel sliding glass door assemblies, often 12 to 16 feet wide, are a primary source of air infiltration and water intrusion after thirty-plus years of humidity cycling. We replace these with modern three-panel or four-panel impact-rated rollers from CWS or PGT, measured to the existing header and sill conditions. Sliding & Patio Doors in The Acreage covers sizing, hardware, and permit handling.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in The Acreage
Window installation in The Acreage means working with 1980s and 1990s custom construction that used aluminum-frame, single-pane units in oversized openings, often with minimal or degraded moisture barriers after decades of Loxahatchee-adjacent humidity. The specific problem we solve is matching modern performance to existing sightlines without structural modification, while pulling permits through Palm Beach County’s Building Division and scheduling inspections with the rural-address lag factored in. Window Installation is our core service, governed by the Haven Standard since 2012.
Single & Double Hung Windows
Signs you need it
Your sashes no longer stay open, the balance springs have failed, or you feel drafts around the meeting rail on original 1980s aluminum units.
What it costs in The Acreage
Standard vinyl single or double hung installation runs $650-$1,100 per opening; impact-rated units with laminated glass run $1,800-$2,800.
How we do it
We measure the rough opening and existing frame depth, specify the replacement from our eight manufacturer lines, remove the old unit, install the new with proper sill pan and backer rod, and photograph every step for the documented record.
3-Panel Sliding (3-Lite Roller) Windows
Signs you need it
The rollers grind, the track is corroded from humidity, or the locking mechanism no longer engages on original aluminum frames.
What it costs in The Acreage
Three-lite roller replacement in standard aluminum runs $1,200-$2,100; impact-rated with reinforced interlocks runs $2,800-$4,200.
How we do it
We survey the header load and sill condition, specify the roller system from PGT or CWS, remove the old assembly, install the new track and panels with shims and structural screws, and seal with backer rod and silicone.
What Window Installation Costs in The Acreage
| Item | Typical range in The Acreage |
|---|---|
| Standard vinyl single/double hung | $650 - $1,100 |
| Impact-rated single/double hung | $1,800 - $2,800 |
| 3-lite roller (standard aluminum) | $1,200 - $2,100 |
| 3-lite roller (impact-rated) | $2,800 - $4,200 |
How long does window installation take in The Acreage?
Most single openings take four to six hours; a full-home retrofit of 20 to 30 openings typically spans five to eight working days, with Palm Beach County inspection scheduling adding one to three days. Call (561) 286-4734 for a timeline based on your specific opening count.
Do you pull permits for window installation in The Acreage?
Yes, every window installation requires a permit from Palm Beach County’s Building Division; we handle the application, schedule inspections, and build the rural-address buffer into the project timeline. Call (561) 286-4734 to confirm your permit path.
Door Installation in The Acreage
Door installation in The Acreage addresses the same 1980s and 1990s custom construction that used hollow-core or minimally insulated entry doors with wood frames now compromised by decades of ground-level humidity. The specific problem is rot in the frame, sill pan, and rough opening, compounded by original doors that fail current wind-borne debris and energy code. Door Installation covers our full measured survey and specification process.
Entry Doors
Signs you need it
The jamb is soft to the touch, the door sticks seasonally, or daylight is visible around the perimeter seal.
What it costs in The Acreage
Standard fiberglass or steel entry door installation runs $1,400-$2,600; impact-rated with laminated glass sidelites runs $3,200-$5,500.
How we do it
We probe the jamb and sill for rot, measure the rough opening, specify the door and frame system from Therma-Tru or PGT, remove the compromised assembly, install the new unit with composite sill pan and proper flashing, and photograph the completed assembly.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your insurance carrier has flagged non-impact entry doors, or you are retrofitting for Florida Building Code compliance on a pre-2002 home.
What it costs in The Acreage
Impact-rated entry door with reinforced frame and laminated glass runs $3,200-$5,500; with integrated sidelites and transom, $5,500-$8,200.
How we do it
We verify the wind zone and exposure category, specify the door from CGI or PGT with Miami-Dade or Florida Product Approval, pull the Palm Beach County permit, install with structural anchors and continuous sill pan, and schedule inspection.
What Door Installation Costs in The Acreage
| Item | Typical range in The Acreage |
|---|---|
| Standard fiberglass/steel entry door | $1,400 - $2,600 |
| Impact-rated entry door | $3,200 - $5,500 |
| Impact entry with sidelites/transom | $5,500 - $8,200 |
How long does door installation take in The Acreage?
Most entry door replacements take one day; impact-rated units with sidelites or transoms may require two days, plus Palm Beach County inspection scheduling. Call (561) 286-4734 for a written timeline.
Do you replace rotted door frames in The Acreage?
Yes, we probe and document frame and sill condition during the measured survey, specify composite or PVC replacement materials where rot is present, and include that scope in the written price. Call (561) 286-4734 to schedule the survey.
Energy-Efficient Windows in The Acreage
Energy-efficient windows in The Acreage solve a specific problem: original 1980s and 1990s single-pane aluminum units with no low-E coating and failed weatherstripping, running air conditioning against 95-degree summer heat and 85-percent humidity with no thermal break. The payoff is measured in reduced cooling load and documented with U-factor and SHGC ratings on the written specification. Energy-Efficient Windows details our performance tiers.
Low-E & Argon Gas Glass
Signs you need it
Your windows are hot to the touch in summer, your AC runs continuously, or you have no low-E coating on original single-pane units.
What it costs in The Acreage
Low-E with argon fill in a standard vinyl frame runs $750-$1,300 per opening; with impact-rated laminated glass, $2,000-$3,100.
How we do it
We measure the existing glazing pocket, specify the low-E coating and argon fill from ECO Window Systems or ES Windows, install with warm-edge spacers and proper seal, and document the U-factor and SHGC on the final record.
ENERGY STAR Replacement Windows
Signs you need it
You are replacing windows for utility rebate eligibility or your home fails current energy code on sale or refinance.
What it costs in The Acreage
ENERGY STAR certified vinyl replacement windows run $850-$1,500 per opening; impact-rated ENERGY STAR units run $2,200-$3,400.
How we do it
We verify the NFRC label requirements, specify from CWS or ECO Window Systems with documented U-factor below 0.30 and SHGC below 0.25, install per manufacturer instructions, and provide the certification documentation for rebate submission.
What Energy-Efficient Windows Costs in The Acreage
| Item | Typical range in The Acreage |
|---|---|
| Low-E/argon standard vinyl | $750 - $1,300 |
| Low-E/argon impact-rated | $2,000 - $3,100 |
| ENERGY STAR vinyl replacement | $850 - $1,500 |
| ENERGY STAR impact-rated | $2,200 - $3,400 |
Will energy-efficient windows lower my AC bill in The Acreage?
Yes, replacing single-pane aluminum with low-E, argon-filled units typically reduces cooling load 15 to 25 percent in The Acreage’s climate; we document the U-factor and SHGC on every quote. Call (561) 286-4734 for a measured survey and written projection.
Do energy-efficient windows qualify for rebates in The Acreage?
ENERGY STAR certified units may qualify for utility rebates; we provide the NFRC documentation and certification numbers needed for submission. Call (561) 286-4734 to verify current rebate eligibility.
Impact Garage Doors in The Acreage
Impact garage doors in The Acreage address a gap in many 1980s and 1990s custom homes: the garage door was never upgraded to wind-borne debris standards, leaving the largest opening in the house unprotected during hurricane events. The specific problem is that a failed garage door pressurizes the structure and compromises the roof, a failure mode well-documented in Florida post-hurricane engineering. Impact Garage Doors covers our specification and code-compliance process.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door has no wind rating sticker, the panels are uninsulated and unbraced, or your insurance inspection flagged the opening.
What it costs in The Acreage
Hurricane-rated steel garage door installation runs $2,800-$4,500 for a two-car opening; with impact-rated windows and reinforced track, $4,500-$7,200.
How we do it
We measure the opening and header capacity, specify the wind-rated door from Mr-Glass or PGT with Miami-Dade approval, remove the old door and track, install the new assembly with reinforced brackets and proper spring balance, and schedule Palm Beach County inspection.
Wind-Load Code Compliance
Signs you need it
You are selling or refinancing and the 4-point inspection flagged the garage door for no wind rating, or you are retrofitting to current Florida Building Code.
What it costs in The Acreage
Wind-load compliant upgrade with documentation runs $3,200-$5,000 for standard two-car; with full impact glazing and hardware, $5,000-$8,500.
How we do it
We verify the wind speed and exposure category for your specific address, specify the door and hardware from our manufacturer lines with Florida Product Approval, pull the permit, install with engineered drawings if required, and provide the compliance documentation.
What Impact Garage Doors Costs in The Acreage
| Item | Typical range in The Acreage |
|---|---|
| Hurricane-rated steel (2-car) | $2,800 - $4,500 |
| Hurricane-rated with impact windows | $4,500 - $7,200 |
| Wind-load compliance upgrade | $3,200 - $5,000 |
Do I need a permit for garage door replacement in The Acreage?
Yes, all garage door replacements require a Palm Beach County permit; we handle the application, engineered drawings if required, and inspection scheduling. Call (561) 286-4734 to confirm your specific code path.
How long does impact garage door installation take?
Most hurricane-rated garage door installations take one day; wind-load compliance upgrades with documentation may require two days, plus inspection scheduling. Call (561) 286-4734 for a written timeline and price.
Custom & Geometric Windows in The Acreage
Custom and geometric windows in The Acreage preserve the architectural character of 1980s and 1990s custom homes that used arched, circular, and oversized picture windows as signature design elements. The specific problem is that these non-standard shapes cannot be replaced with stock units, and original single-pane versions are now failed for both energy and impact code. Custom & Geometric Windows covers our measurement and fabrication process.
Arched & Curved Windows
Signs you need it
Your arched window has fogged between panes, the curved frame has separated, or you need impact-rated replacement without altering the masonry arch.
What it costs in The Acreage
Custom arched window with curved frame runs $2,200-$4,000; impact-rated with laminated curved glass, $4,500-$7,500.
How we do it
We take a full-size template or digital radius measurement, specify the custom frame from PGT or ViewLux with curved laminated glass, fabricate to the measured profile, install with flexible flashing and backer rod, and photograph the completed assembly.
Oversized Openings
Signs you need it
Your picture window exceeds 72 inches in either dimension, the original glass is single-pane, or the frame has sagged under load.
What it costs in The Acreage
Oversized custom picture window runs $3,500-$6,000; impact-rated with reinforced frame and laminated glass, $7,000-$12,000.
How we do it
We measure the rough opening and verify header capacity, specify the unit from CGI or ViewLux with engineered support if needed, crane or team-lift the glass, install with structural fasteners and continuous sill pan, and document the load path in the photo record.
What Custom & Geometric Windows Costs in The Acreage
| Item | Typical range in The Acreage |
|---|---|
| Custom arched window | $2,200 - $4,000 |
| Impact-rated arched window | $4,500 - $7,500 |
| Oversized custom picture window | $3,500 - $6,000 |
| Impact-rated oversized opening | $7,000 - $12,000 |
How do you measure arched windows in The Acreage?
We take a full-size template or digital radius measurement on-site, fabricate to that exact profile, and the customer keeps the measured survey as part of the written scope. Call (561) 286-4734 to schedule the template appointment.
Can oversized windows be impact-rated in The Acreage?
Yes, we specify laminated glass and reinforced frames from CGI or ViewLux for openings up to 120 inches, with engineered header support if required; every unit carries Miami-Dade or Florida Product Approval. Call (561) 286-4734 for a measured survey and written specification.
Brands We Service in The Acreage
We specify from eight manufacturer lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. In The Acreage, we stock common hardware and weatherstripping for PGT and CWS sliding systems locally, with most special-order components arriving within five to seven business days. See our brands for performance tiers and specifications.
Pricing for Windows & Doors in The Acreage, FL
| Service | Typical range in The Acreage |
|---|---|
| Standard vinyl single/double hung window | $650 - $1,100 |
| Impact-rated single/double hung window | $1,800 - $2,800 |
| 3-lite roller window (standard) | $1,200 - $2,100 |
| 3-lite roller window (impact-rated) | $2,800 - $4,200 |
| Standard fiberglass/steel entry door | $1,400 - $2,600 |
| Impact-rated entry door | $3,200 - $5,500 |
| Low-E/argon energy-efficient window | $750 - $1,300 |
| ENERGY STAR certified replacement window | $850 - $1,500 |
| Hurricane-rated garage door (2-car) | $2,800 - $4,500 |
| Wind-load garage door compliance upgrade | $3,200 - $5,000 |
| Custom arched window | $2,200 - $4,000 |
| Oversized custom picture window | $3,500 - $6,000 |
Prices in The Acreage push higher when we encounter degraded moisture barriers requiring sill pan replacement, or when engineered drawings are required for oversized or custom shapes. The written price from our measured survey is the final price; Haven Clause 1 means no change orders.
Neighborhoods We Serve in The Acreage
We serve the full unincorporated area, from the northern reaches near 60th Street North to the southern boundary at 130th Avenue, and from the Loxahatchee wetlands edge west to the Seminole Pratt Whitney corridor. Crews dispatch from our Miami office and typically arrive within scheduled windows that account for the rural road network.
- Acreage West
- Seminole Ridge
- 60th Street North corridor
- 130th Avenue South area
- Loxahatchee wetlands edge
Service Area - Cities Near The Acreage
We install and replace windows and doors throughout western Palm Beach County and the surrounding agricultural communities. Our crews also serve Belle Glade, FL, South Bay, FL, Pahokee, FL, and Clewiston, FL from the same South Florida coordination office, with the same measured survey and written-price process.
Serving The Acreage, FL - Our Local Coverage Area
We’re based in the The Acreage area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in The Acreage
Because The Acreage is unincorporated, all permits route through Palm Beach County’s Building Division in West Palm Beach, not a city hall. We handle the application, schedule inspections, and build the one-to-three-day rural-address buffer into every timeline we write.
Some larger-lot subdivisions in The Acreage have deed restrictions on exterior appearance; we review your specific covenants during the measured survey and specify products that comply, with the documentation included in your written scope.
We schedule measured surveys with specific appointment windows; live phone coverage is available 24/7 at (561) 286-4734 to book. Installation timelines include the Palm Beach County permit and inspection buffer that every far-western address requires.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What The Acreage Customers Say
"They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.