Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Wellington, FL
Window and door installation in Wellington, FL typically runs $650-$2,800 per opening depending on product tier and code requirements, with most full-home projects spanning 12-20 units across the community’s concentrated stock of 1975-1995 CBS homes. We’re Sightline Windows & Doors, and we measure every opening under the Haven Standard - the written price you receive before any work starts is the same document that governs the installation. Call (561) 286-4734 to schedule your free measured survey.
Why Wellington Homes Are Different
Wellington was developed almost entirely between the mid-1970s and late 1990s as a master-planned community, leaving a dense, concentrated stock of pre-Hurricane-Andrew-code CBS homes with original builder-grade aluminum windows and sliding glass doors now 30-50 years old and non-compliant with today’s Palm Beach County impact-protection requirements. Because Wellington’s inland location leads many homeowners to underestimate their wind-exposure obligations, the trigger is almost always a permit pull or wind-mitigation inspection for insurance - making FBC compliance education the defining sales conversation on virtually every job here.
The housing uniformity means entire subdivisions age out simultaneously. Year-round UV intensity and punishing afternoon thunderstorm humidity accelerate seal failure and sill corrosion on aging aluminum frames, causing water intrusion that homeowners routinely misdiagnose as a roof problem until the frame is opened up. Wellington’s numerous HOA-governed subdivisions - Olympia, Versailles, Binks Estates, and others - each maintain architectural review boards that must approve frame color, grid pattern, and sometimes glass tint before any replacement can proceed, a local approval layer that routinely surprises contractors who only work coastal Palm Beach markets and can add 3-5 weeks to a project timeline if not built into the initial contract.
Our Main Wellington Services
Most Wellington homeowners who call us start with one of these three projects:
Window Replacement in Wellington
Full-frame replacement of the original single-pane aluminum units found in Wellington’s 1975-1995 CBS homes, upgraded to current Florida Product Approval standards with impact-rated or shutter-compliant glazing. We handle the measured survey, the HOA architectural review packet, and the permit pull as a single documented workflow. Window Replacement in Wellington covers our complete process for these retrofits.
Impact Windows & Doors in Wellington
Impact-rated glazing and framing systems that satisfy Palm Beach County’s high design-wind-speed zone requirements without secondary shutter protection, critical for Wellington homeowners facing insurance wind-mitigation inspections or new construction permitting. We specify PGT and CGI lines by performance tier and price range, not by margin. Impact Windows & Doors in Wellington details our product matching protocol.
Sliding & Patio Doors in Wellington
Replacement of the original aluminum sliding glass doors that dominate Wellington’s ranch and Mediterranean-influenced floor plans, upgraded to impact-rated or energy-efficient systems with proper sill pan flashing to address the water intrusion patterns we see repeatedly in these homes. Sliding & Patio Doors in Wellington explains our flashing and drainage details.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Wellington
Window installation in Wellington means working within a narrow construction era - nearly every home dates from the community’s 1975-1995 master-planned expansion, carrying original builder-grade aluminum single-pane units that have far exceeded their service life. The sheer uniformity means we see the same failure patterns across entire subdivisions: seal degradation from UV exposure, sill corrosion from thunderstorm humidity, and frame deflection that compromises the opening’s structural integrity. Window Installation covers our full technical scope, but Wellington’s conditions demand specific product and workflow adaptations.
Single & Double Hung Windows
Signs you need it
The sash won’t stay open, you feel air movement at the meeting rail, or condensation collects between panes on Wellington’s humid August afternoons.
What it costs in Wellington
Single and double hung window installation in Wellington typically ranges $720-$1,450 per opening for vinyl-framed impact-rated units, with aluminum-clad wood systems running $1,200-$2,100.
How we do it
We remove the existing frame to the rough opening, inspect the sill pan and buck framing for moisture damage, install the new unit with backer rod and sealant per FBC R613, then document the sightline measurement and fastener pattern in your photo record.
Horizontal Roller Windows
Signs you need it
The sash binds in the track, the lock no longer engages flush, or you see daylight at the header when the sash is closed.
What it costs in Wellington
Horizontal roller window installation in Wellington typically ranges $680-$1,380 per opening for standard sizes, with oversized units or custom grille patterns adding $180-$340.
How we do it
We verify the existing rough opening is square within 1/8 inch, set the frame on a bed of sealant, shim at the jamb screws only, then test the sash travel and lock engagement before sealing the perimeter and photographing the completed installation.
What Window Installation Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Single or double hung window, vinyl impact-rated | $720 - $1,450 |
| Horizontal roller window, standard size | $680 - $1,380 |
| Aluminum-clad wood double hung | $1,200 - $2,100 |
Do you pull permits for window replacement in Wellington?
Yes - Palm Beach County requires a permit for every window and door replacement, and we include the permit pull and inspection scheduling in every written scope. The permit fee typically runs $85-$140 depending on the number of openings, and we handle the HOA architectural review packet simultaneously where required. Call (561) 286-4734 and we’ll confirm the current fee schedule for your subdivision.
How long does window installation take in Wellington?
Most Wellington window projects complete in 2-4 working days for 12-16 openings, with an additional 3-5 weeks built in for HOA architectural review where applicable. We don’t start demolition until the written scope, permit, and HOA approval - if required - are all documented and confirmed. Call (561) 286-4734 to review your specific timeline.
Door Installation in Wellington
Door installation in Wellington confronts the same concentrated housing stock as window work - original 1975-1995 aluminum-frame entries and sliding glass doors now failing at the sill, the jamb, and the lock hardware simultaneously. The threshold detail is critical: Wellington’s afternoon thunderstorm pattern drives water against the door base with sustained intensity, and original installations often lacked proper sill pan flashing, leading to concealed subfloor damage we discover only during removal. Door Installation outlines our standard protocols, but Wellington’s humidity and wind-exposure profile require specific product selection.
Entry Doors
Signs you need it
The door sticks seasonally, the threshold is soft or discolored, or you see daylight at the jamb when the door is closed and locked.
What it costs in Wellington
Entry door installation in Wellington typically ranges $1,850-$3,400 for fiberglass systems with impact-rated glass, with Therma-Tru and ViewLux lines specified by performance tier.
How we do it
We remove the existing unit and inspect the subfloor and framing for moisture damage, install a pre-formed sill pan with end dams, set the new pre-hung unit plumb and level, then seal the perimeter with backer rod and approved sealant before testing operation and documenting the installation.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your insurance wind-mitigation inspection flagged the entry door as non-compliant, or you’re replacing a decorative glass lite with no impact rating.
What it costs in Wellington
Hurricane-rated entry door installation in Wellington typically ranges $2,400-$4,200 including the impact-rated lite kit, hardware, and permit.
How we do it
We verify the Florida Product Approval number matches the opening’s design pressure requirement, install the door and lite as a tested assembly with no field modifications, then schedule the county inspection and provide the passed inspection documentation for your insurance file.
What Door Installation Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Fiberglass entry door with impact-rated glass | $1,850 - $3,400 |
| Hurricane-rated entry door with lite kit | $2,400 - $4,200 |
| Patio door replacement, vinyl impact-rated | $1,600 - $2,800 |
Do I need HOA approval to replace my front door in Wellington?
Almost certainly - Wellington subdivisions including Olympia, Versailles, and Binks Estates require architectural review board approval for frame color, glass style, and sometimes hardware finish before permit application. We include the HOA packet preparation in our initial measured survey and build the review timeline into your written scope. Call (561) 286-4734 to confirm your specific HOA requirements.
Can you match my existing door style for a Wellington replacement?
We can match most panel profiles, grille patterns, and glass designs from our eight manufacturer lines, and we document the existing unit with measured photos before specification. Exact matches depend on the original manufacturer and current availability; we’ll show you the closest alternatives in writing before you commit. Call (561) 286-4734 to schedule the survey.
Energy-Efficient Windows in Wellington
Energy-efficient window installation in Wellington addresses a specific climate paradox: despite 12 miles of inland buffer, the community still faces Palm Beach County’s punishing UV index and afternoon thunderstorm humidity, while original single-pane aluminum units conduct heat directly into conditioned space. The energy penalty is concentrated in homes built during the 1975-1995 boom, where uniform construction means entire neighborhoods suffer the same thermal bridging and solar heat gain patterns simultaneously. Energy-Efficient Windows explains our performance specification process, but Wellington’s conditions favor specific glazing packages.
Low-E & Argon Gas Glass
Signs you need it
Your west-facing rooms are uncomfortably hot after 2 PM, your cooling runs continuously in July, or you feel radiant heat through the glass even when the room is cool.
What it costs in Wellington
Low-E with argon gas upgrade in Wellington typically adds $80-$140 per opening to the base window price, with payback periods of 4-7 years depending on cooling load and utility rate.
How we do it
We specify the coating location and emissivity value based on your home’s orientation and shading, verify the argon fill rate at delivery, then document the U-factor and SHGC ratings on your written scope for utility rebate or tax credit qualification.
ENERGY STAR Replacement Windows
Signs you need it
You’re replacing windows anyway and want to qualify for available federal or utility incentives, or your cooling costs exceed $280 monthly in summer.
What it costs in Wellington
ENERGY STAR certified window installation in Wellington typically ranges $820-$1,580 per opening for vinyl-framed systems, with the ENERGY STAR premium running $60-$120 over standard impact-rated units.
How we do it
We match the NFRC label data to your home’s specific climate zone requirements, install per manufacturer specifications to preserve the thermal break integrity, then provide the certification documentation and your photo record for incentive application.
What Energy-Efficient Windows Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Low-E/argon upgrade, per opening | +$80 - $140 |
| ENERGY STAR vinyl window, installed | $820 - $1,580 |
| Triple-pane upgrade for north-facing exposure | +$340 - $580 |
Will energy-efficient windows lower my cooling bill in Wellington?
Yes - most Wellington homeowners see 15-25% summer cooling reduction after replacing single-pane aluminum units with Low-E argon-filled systems, with the greatest impact on west and south exposures. We calculate estimated savings from your current window count, orientation, and FPL rate schedule during the measured survey. Call (561) 286-4734 for the specific projection.
Do energy-efficient windows also meet impact requirements in Wellington?
They must - Palm Beach County requires current Florida Product Approval for impact resistance on all permitted replacements, so every energy-efficient system we specify carries both the NFRC performance label and the FBC impact rating. We don’t install energy performance without code compliance; the written scope includes both ratings. Call (561) 286-4734 to review the documentation.
Impact Garage Doors in Wellington
Impact garage door installation in Wellington is the most commonly underestimated code requirement in the community - homeowners focused on windows and entry doors often discover at permit application or wind-mitigation inspection that the garage door must also carry a current Florida Product Approval for wind-borne debris. The original non-rated sectional doors on Wellington’s 1975-1995 homes fail this test categorically, and replacement triggers the same HOA architectural review as windows in most subdivisions. Impact Garage Doors covers our full technical specification, but Wellington’s inland wind-exposure zone still demands full compliance.
Hurricane-Rated Garage Doors
Signs you need it
Your wind-mitigation inspection flagged the garage door as non-compliant, you’re replacing the door as part of a larger project, or the existing door has no visible Florida Product Approval label.
What it costs in Wellington
Hurricane-rated garage door installation in Wellington typically ranges $2,200-$4,800 for a standard 16-foot double-wide sectional, with wind-load rating and glazing options driving the variance.
How we do it
We verify the design pressure requirement from your home’s exposure category and roof height, specify the door and track as a tested assembly with no field modifications to the reinforcement, then install with proper jamb fastening and schedule county inspection.
Wind-Load Code Compliance
Signs you need it
Your permit application for other work triggered a garage door compliance check, or your insurance renewal requires updated wind-mitigation documentation.
What it costs in Wellington
Wind-load retrofit of an existing garage door in Wellington typically ranges $680-$1,450 for reinforcement kits, track replacement, and hardware upgrade, though full door replacement is often more cost-effective.
How we do it
We assess the existing door’s structural capacity against the required design pressure, engineer a reinforcement or replacement solution, then install and test the assembly before scheduling inspection and documenting compliance in your photo record.
What Impact Garage Doors Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Hurricane-rated garage door, 16′ double-wide | $2,200 - $4,800 |
| Wind-load retrofit kit with track replacement | $680 - $1,450 |
| Impact-rated garage door glass panel upgrade | $340 - $720 |
Does my garage door need to be impact-rated if I’m only replacing windows in Wellington?
Not automatically - but if your permit application triggers a full wind-mitigation review, or if your insurance inspection is due, the garage door will be checked. We assess garage door compliance during our initial measured survey and flag any issues in the written scope before permit submission. Call (561) 286-4734 to include this check.
Can you match my HOA’s garage door style requirements in Wellington?
Yes - we work with manufacturer lines that offer raised panel, carriage house, and contemporary profiles in multiple colors and window configurations, and we include the HOA architectural review packet with measured photos and manufacturer cut sheets. Approval timing varies by subdivision; we build this into your written schedule. Call (561) 286-4734 to start the packet.
Custom & Geometric Windows in Wellington
Custom and geometric window installation in Wellington serves two distinct needs: the homeowner replacing original builder-grade units with architecturally specific shapes that must maintain HOA compliance, and the homeowner upgrading to impact-rated custom forms that satisfy FBC requirements while preserving the home’s designed character. Wellington’s 1975-1995 master-planned homes include numerous arched, octagonal, and extended eyebrow features that original builders executed in fixed aluminum with single-pane glass - now failed and non-compliant. Custom & Geometric Windows details our templating and fabrication coordination, but Wellington’s HOA layer adds a critical approval step.
Geometric & Shaped Windows
Signs you need it
The original fixed geometric window is fogged or leaking, the shape is no longer available as a standard unit, or your HOA requires exact visual match for replacement.
What it costs in Wellington
Geometric and shaped window installation in Wellington typically ranges $1,400-$2,800 per opening, with template complexity and impact-rating requirements driving the upper range.
How we do it
We create a physical template of your existing opening, specify the custom unit from our PGT or ViewLux custom lines with exact radius and angle match, then fabricate to template and install with field-verified shimming and sealing.
Arched & Curved Windows
Signs you need it
The radius window over your entry has separated at the frame joint, the curved glass shows stress cracks, or the arched transom no longer seals against wind-driven rain.
What it costs in Wellington
Arched and curved window installation in Wellington typically ranges $1,800-$3,400 per opening for true-radius units, with segmented arch alternatives at $1,200-$2,200 where the HOA permits visual approximation.
How we do it
We measure the exact radius or chord length and rise, verify the structural support for the increased weight of laminated impact glass, then fabricate to specification and install with reinforced jamb fastening documented in your photo record.
What Custom & Geometric Windows Costs in Wellington
| Item | Typical range in Wellington |
|---|---|
| Geometric shaped window, standard complexity | $1,400 - $2,800 |
| True-radius arched window | $1,800 - $3,400 |
| Segmented arch alternative | $1,200 - $2,200 |
How long does custom window fabrication take for Wellington orders?
Custom geometric units typically require 6-10 weeks from template approval to delivery, with an additional 3-5 weeks for HOA architectural review in Wellington subdivisions. We don’t fabricate until HOA approval is documented and the written scope is signed - this protects you from producing a unit that fails review. Call (561) 286-4734 to confirm current lead times.
Can you replicate my original arched window exactly for Wellington HOA approval?
We can match visible sightlines, grille patterns, and glass tint within manufacturer capability, and we provide the HOA with template photos, shop drawings, and finish samples before fabrication. Exact replication depends on original manufacturer records; we’ll document what’s achievable in writing before you commit. Call (561) 286-4734 to schedule the template survey.
Brands We Service in Wellington
We specify from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - selected by what the opening requires, not by what is in stock. Common hardware, weatherstrip, and sash balances for Wellington’s high-turnover housing stock are inventoried at our Miami office, with most repair parts available in 24-48 hours. See our brands for full performance tier breakdowns.
Pricing for Windows & Doors in Wellington, FL
| Service | Typical range in Wellington |
|---|---|
| Single/double hung window, vinyl impact-rated | $720 - $1,450 |
| Horizontal roller window, standard | $680 - $1,380 |
| Aluminum-clad wood double hung | $1,200 - $2,100 |
| Fiberglass entry door with impact glass | $1,850 - $3,400 |
| Hurricane-rated entry door with lite kit | $2,400 - $4,200 |
| Patio door replacement, vinyl impact-rated | $1,600 - $2,800 |
| Low-E/argon upgrade, per opening | +$80 - $140 |
| ENERGY STAR vinyl window | $820 - $1,580 |
| Hurricane-rated garage door, 16′ double-wide | $2,200 - $4,800 |
| Wind-load garage door retrofit kit | $680 - $1,450 |
| Geometric shaped window | $1,400 - $2,800 |
| True-radius arched window | $1,800 - $3,400 |
Price drivers in Wellington include HOA-required custom finishes, the permit and inspection fees Palm Beach County assesses per opening, and the structural repairs we find once original aluminum frames are removed - particularly sill and subfloor damage from years of unflashed installations. The written quote you receive before any work starts is the same document that governs the final invoice; Haven Clause 1 means no change orders for conditions we should have anticipated.
Neighborhoods We Serve in Wellington
We work across Wellington’s full residential footprint, from the established equestrian properties to the concentrated HOA subdivisions where architectural review requirements shape every project timeline. Our crews serve Wellington locally with scheduling coordinated from our Miami office.
- Olympia
- Versailles
- Binks Estates
- Greenview Shores
- Sugar Pond Manor
Service Area - Cities Near Wellington
Our crews work throughout central and coastal Palm Beach County, with regular projects in Royal Palm Beach, FL, Lake Worth, FL, Greenacres, FL, and West Palm Beach, FL. Each city carries distinct permit requirements, wind-exposure categories, and HOA prevalence; we adjust our measured survey and documentation accordingly.
Serving Wellington, FL - Our Local Coverage Area
We’re based in the Wellington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Wellington
Most Wellington subdivisions require architectural review board approval for frame color, grid pattern, and sometimes glass tint before permit application - a layer that adds 3-5 weeks and surprises contractors unfamiliar with inland Palm Beach County. We include HOA packet preparation in our initial measured survey and don’t start work until approval is documented.
Yes - Wellington falls within Palm Beach County’s high design-wind-speed zone, and all permitted window and door replacements must carry current Florida Product Approval for impact resistance. Shutters or impact glazing are required with no exceptions; your inland location does not exempt you from FBC compliance.
Bring your most recent wind-mitigation inspection if available, your HOA architectural guidelines if you live in a governed subdivision, and any competitor written estimates you’d like us to review under our Free Second Opinion policy. We’ll measure every opening, document current conditions with photos, and leave you with a written scope and price before we depart.
Call (561) 286-4734 to schedule your free measured survey. Every engagement begins with the documented sightline measurement you keep, and the written quote cannot differ from that document - Haven Clause 1, in writing from the start.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Wellington Customers Say
"They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.