Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Westgate, FL
Window and door installation in Westgate, FL typically runs $650-$4,200 per opening depending on product tier, with most retrofits on 1960s-1980s concrete-block homes requiring full-frame replacement rather than insert installation. We measure every opening under the Haven Standard, write the price before any work starts, and leave a documented photo record when the job is done. Call (561) 286-4734 to schedule your free measured survey.
Westgate’s dense concentration of older concrete-block homes with original aluminum single-pane windows and jalousie panels creates a retrofit market unlike newer Palm Beach County suburbs. Insurance carriers are actively canceling or surcharging policies on homes lacking impact-rated glazing, which means the work we do here is often financially protective, not merely cosmetic. Our crews serve Westgate locally, with dispatch and scheduling coordinated from our Miami office.
Why Westgate Homes Are Different
Westgate sits in unincorporated Palm Beach County, just north of the stricter High Velocity Hurricane Zone that governs Miami-Dade and Broward. That geographic position matters for product selection: we use Florida Building Code-approved products with valid NOA documentation, but some HVHZ-exclusive restrictions do not apply, which can expand options and occasionally reduce cost.
The housing stock is remarkably consistent - modest concrete-block single-family homes built between the 1950s and 1980s, many still carrying original aluminum-frame single-pane windows, jalousie panels in bathrooms and enclosed Florida rooms, and hollow-core exterior doors. None of these meet current Palm Beach County wind-load or impact-glazing requirements. Jalousie windows are particularly problematic: there is no code-compliant way to make them impact-resistant, so every jalousie opening must be fully framed out and replaced with a solid impact window. Homeowners routinely call expecting a simple glass swap and learn the scope is substantially larger.
Florida insurance carriers have intensified scrutiny of Westgate homes specifically, with non-impact glazing now triggering cancellations or steep surcharges. That pressure transforms window and door replacement from a discretionary upgrade into a near-mandatory financial survival move, driving urgent retrofit demand we do not see in already-compliant communities to the west.
Our Main Westgate Services
Westgate homeowners call us most often for full-frame window replacement and impact-rated door systems. These three dedicated pages detail what we measure, specify, and install for each:
Window Replacement in Westgate
We replace original aluminum single-pane windows and jalousie panels with FBC-approved impact or energy-efficient systems, measuring each rough opening for square, plumb, and level before writing the scope. Most Westgate retrofits require full-frame removal due to corroded frames and non-standard sizing from the 1960s-1980s construction era. Window Replacement in Westgate
Impact Windows & Doors in Westgate
Impact-rated glazing is the primary path to insurance compliance in Westgate, and we specify products from PGT, CGI, and CWS with valid NOA documentation matched to Palm Beach County’s wind-load requirements. Every installation includes a written price before work starts and a documented photo record of fastening patterns and sealant application. Impact Windows & Doors in Westgate
Sliding & Patio Doors in Westgate
Original sliding glass doors in Westgate homes often run on corroded aluminum tracks with single-pane glazing that fails both impact and energy code. We measure the daylight opening, specify multi-panel or lift-slide systems from ES Windows or ViewLux as the opening requires, and document the installation with photos of the threshold pan, anchor spacing, and operational testing. Sliding & Patio Doors in Westgate
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Westgate
Window installation in Westgate almost always means full-frame replacement on 1960s-1980s concrete-block homes with original aluminum single-pane windows or jalousie panels that cannot be made code-compliant. We start with a measured survey the customer keeps, write a price that cannot differ from that document, and install FBC-approved products with valid NOA documentation. Our Window Installation hub details the full Haven Standard process.
Single & Double Hung Windows
Signs you need it
Original aluminum frames show corrosion at the sill, sashes stick or fall shut, or you feel air movement around the closed sash.
What it costs in Westgate
Single or double hung window installation in Westgate typically ranges $850-$1,650 per opening for vinyl or aluminum impact-rated units, with wood-clad and custom sizing running higher.
How we do it
We remove the existing frame to bare block, install new sill pan flashing, set the replacement unit with structural fasteners at specified spacing, foam the perimeter, cap with matching aluminum, and photograph every step for the job record.
Horizontal Roller Windows
Signs you need it
Roller wheels grind or stick, the sash jumps track in wind, or the original unit lacks the interlocking meeting rail required for impact rating.
What it costs in Westgate
Horizontal roller window installation in Westgate typically ranges $950-$1,850 per opening for impact-rated aluminum frames with laminated glass.
How we do it
We measure the rough opening for square, remove the old frame and track system, install a new sub-sill with positive drainage, set the roller unit with stainless fasteners, adjust track parallelism, and test operation before sealing.
What Window Installation Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Single/Double Hung Window | $850 - $1,650 |
| Horizontal Roller Window | $950 - $1,850 |
| Full-Frame Retrofit (additional labor) | $200 - $400 per opening |
Do I need full-frame replacement or can I use an insert window?
Most Westgate homes require full-frame replacement because original aluminum frames are corroded, out-of-square, or sized for jalousie conversions that inserts cannot accommodate. We determine this during the measured survey and note it on the written scope.
How long does window installation take in Westgate?
Most Westgate retrofits complete in one to two days for a typical home with 8-12 openings, assuming no structural repairs to the block opening are needed. Call (561) 286-4734 to schedule your free measured survey and written timeline.
Door Installation in Westgate
Door installation in Westgate addresses hollow-core original exterior doors and un-rated French doors that fail both impact and energy requirements on 1960s-1980s concrete-block homes. We measure the rough opening, specify the proper jamb depth for block construction, and write the price before any demolition begins. Our Door Installation hub covers the full product range.
Hurricane-Proof Front & Entry Doors
Signs you need it
Your current front door is hollow-core, lacks a rated jamb and hinge system, or your insurance inspection flagged the entry as non-compliant.
What it costs in Westgate
Hurricane-rated entry door installation in Westgate typically ranges $1,850-$3,400 for fiberglass or steel systems with impact glazing and reinforced jambs.
How we do it
We remove the existing door and frame to bare block, install a pressure-rated jamb with structural anchors through the hinge side, hang the door with three-point locking hardware, install impact-rated sidelites if specified, and test latching under load before final sealant.
French & Double Doors
Signs you need it
Original French doors rattle in wind, show daylight at the meeting stile, or lack the multi-point locking and laminated glass required for Palm Beach County.
What it costs in Westgate
French or double door installation in Westgate typically ranges $2,400-$4,200 for impact-rated aluminum or vinyl systems with laminated glazing.
How we do it
We reinforce the header if needed for the wider span, install a composite or aluminum threshold with positive drainage, set both door panels with integrated astragal and multi-point lock hardware, adjust meeting stile compression, and document the installation with photos of anchor spacing and hardware function.
What Door Installation Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Hurricane-Rated Entry Door | $1,850 - $3,400 |
| French/Double Door System | $2,400 - $4,200 |
| Structural Header Reinforcement | $350 - $750 |
Can I keep my decorative glass if I upgrade to impact-rated?
Decorative glass must be replaced with laminated impact-rated glazing that meets FBC requirements; we specify decorative laminate options from Therma-Tru and ViewLux that preserve the aesthetic while meeting code.
Will the door installation require stucco repair?
Most Westgate door retrofits require some stucco patching at the frame perimeter; we include this in the written scope and match texture as closely as possible, though exact color match may require a separate painter.
Energy-Efficient Windows in Westgate
Energy-efficient window installation in Westgate targets the original single-pane aluminum windows that dominate 1960s-1980s concrete-block homes, where summer cooling loads and solar heat gain drive utility costs well above newer construction. We specify products by U-factor and SHGC performance, not by brand margin, and write the price before any work starts. Our Energy-Efficient Windows hub details the full specification process.
Low-E & Argon Gas Glass
Signs you need it
Rooms with western exposure overheat by mid-afternoon, your FPL bills spike in summer, or glass surfaces feel hot to the touch from the interior.
What it costs in Westgate
Low-E with argon gas upgrade in Westgate typically adds $80-$150 per opening above standard laminated glass, with payback periods under five years in this climate.
How we do it
We specify the appropriate Low-E coating for Westgate’s solar orientation, order insulated glass units with argon fill and warm-edge spacers, install them in FBC-rated frames, and provide the NFRC performance label documentation for your records.
ENERGY STAR Replacement Windows
Signs you need it
Your current windows are single-pane, your home fails an energy audit, or you’re pursuing FPL rebates that require certified products.
What it costs in Westgate
ENERGY STAR certified window installation in Westgate typically ranges $1,050-$2,100 per opening for impact-rated systems that carry both ENERGY STAR and FBC approval.
How we do it
We verify the product’s NFRC U-factor and SHGC ratings against South Florida climate zone requirements, install with proper air sealing at the frame perimeter, and document the performance labels and installation photos for rebate submission if applicable.
What Energy-Efficient Windows Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Low-E/Argon Upgrade | $80 - $150 per opening (add-on) |
| ENERGY STAR Impact Window | $1,050 - $2,100 per opening |
| Whole-Home Energy Package (10+ openings) | $9,500 - $18,000 |
Do energy-efficient windows qualify for rebates in Westgate?
FPL periodically offers rebates for ENERGY STAR window upgrades in Palm Beach County; we provide the NFRC documentation and installation certificate you need to apply, but cannot guarantee current program availability.
Will Low-E coating make my rooms darker?
Modern Low-E coatings are spectrally selective, blocking infrared heat while maintaining high visible light transmission; we specify VT (visible transmittance) ratings above 0.60 for living areas so rooms stay bright.
Impact Garage Doors in Westgate
Impact garage door installation in Westgate addresses a critical vulnerability: original non-rated garage doors on 1960s-1980s homes that fail wind-load requirements and allow rapid internal pressurization during storm events. We specify wind-rated systems with proper track anchorage to the concrete-block structure, and write the price before any work begins. Our Impact Garage Doors hub covers the full specification range.
Hurricane-Rated Garage Doors
Signs you need it
Your garage door lacks a wind-load sticker, the panels flex visibly in moderate wind, or your insurance inspection specifically flagged the garage opening.
What it costs in Westgate
Hurricane-rated garage door installation in Westgate typically ranges $2,200-$4,800 for a single or double car opening, depending on wind-load rating and insulation level.
How we do it
We measure the finished opening and headroom, specify a door with the proper WFCM wind-load rating for Palm Beach County, install heavy-duty track with continuous angle anchored to block, add reinforcement struts as required, and test cycle balance and auto-reverse before documenting with photos.
Wind-Load Code Compliance
Signs you need it
You’re replacing a garage door after an insurance cancellation notice, or your permit application requires documentation of FBC-compliant opening protection.
What it costs in Westgate
Wind-load code compliance retrofit in Westgate typically ranges $2,800-$5,400 when structural reinforcement of the header or jambs is required beyond standard door replacement.
How we do it
We assess the existing header span and anchor capacity, engineer reinforcement if needed, install the rated door and track system, pull permits and schedule inspection, and provide the NOA documentation and passed inspection record for your insurance file.
What Impact Garage Doors Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Hurricane-Rated Garage Door | $2,200 - $4,800 |
| Wind-Load Compliance Retrofit | $2,800 - $5,400 |
| Header/Jamb Structural Reinforcement | $600 - $1,200 |
Does my garage door need impact-rated glass too?
Glass sections in garage doors must use impact-rated glazing or be protected with approved shutters; we specify either laminated glass panels or solid door sections without glazing, depending on your preference and the door’s structural rating.
Can I keep my garage door opener?
Most modern openers can be reinstalled on a new wind-rated door if they’re in good condition and properly sized for the door weight; we test spring balance and opener force settings and note any needed upgrades on the written scope.
Custom & Geometric Windows in Westgate
Custom and geometric window installation in Westgate solves the architectural mismatch when homeowners update 1960s-1980s concrete-block homes but want to preserve or add character through shaped openings. We measure radius, chord, and sightline dimensions precisely, specify products from manufacturers tooled for custom geometry, and write the price before any fabrication begins. Our Custom & Geometric Windows hub details the full design and specification process.
Geometric & Shaped Windows
Signs you need it
You want to replace an existing shaped window with matching impact-rated geometry, or you’re adding a gable-end feature that requires a trapezoid, octagon, or circle-top unit.
What it costs in Westgate
Geometric shaped window installation in Westgate typically ranges $1,400-$3,200 per opening, with premium radius work and custom grille patterns at the higher end.
How we do it
We field-measure the exact chord, radius, and rise, create a full-size template for factory approval, specify laminated impact-rated glass with the proper edge clearance for the shape, install with custom flashing kits, and document the fit and sealant continuity with photos.
Arched & Curved Windows
Signs you need it
Your home has original arched windows that have leaked or corroded, or you’re matching a new installation to existing architectural details in a Westgate retrofit.
What it costs in Westgate
Arched or curved window installation in Westgate typically ranges $1,800-$3,800 per opening, with true radius construction costing more than sprung-arch approximations.
How we do it
We determine whether the existing arch is a true radius or elliptical spring, measure spring-line to apex precisely, specify a curved frame from PGT or ViewLux with custom bent laminated glass, install with continuous head flashing following the curve, and verify weep drainage before final seal.
What Custom & Geometric Windows Costs in Westgate
| Item | Typical range in Westgate |
|---|---|
| Geometric/Shaped Window | $1,400 - $3,200 |
| Arched/Curved Window | $1,800 - $3,800 |
| Custom Template & Factory Approval | $250 - $500 (one-time per shape) |
How long does custom window fabrication take?
Custom geometric windows typically require 6-10 weeks from measured survey to delivery, depending on the manufacturer’s current queue and the complexity of the shape; we build this timeline into the written scope.
Can you match my existing arched windows exactly?
We measure the existing radius, sightline, and grille pattern precisely and specify from manufacturers with true custom capability; exact matches are achievable for most common architectural styles found in Westgate’s 1960s-1980s housing stock.
Brands We Service in Westgate
We install and service eight verified manufacturer lines in Westgate: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. We stock common hardware, weatherstrip, and sash balances locally for faster turnaround on service calls. See our brands for full specifications and performance tiers.
Pricing for Windows & Doors in Westgate, FL
| Service | Typical range in Westgate |
|---|---|
| Single/Double Hung Window | $850 - $1,650 |
| Horizontal Roller Window | $950 - $1,850 |
| Hurricane-Rated Entry Door | $1,850 - $3,400 |
| French/Double Door System | $2,400 - $4,200 |
| Low-E/Argon Upgrade | $80 - $150 per opening |
| ENERGY STAR Impact Window | $1,050 - $2,100 |
| Hurricane-Rated Garage Door | $2,200 - $4,800 |
| Wind-Load Compliance Retrofit | $2,800 - $5,400 |
| Geometric/Shaped Window | $1,400 - $3,200 |
| Arched/Curved Window | $1,800 - $3,800 |
Prices in Westgate push higher when full-frame removal is required on corroded aluminum originals, when structural reinforcement of block openings is needed, or when custom shapes require factory templating. Every price is written before work starts under Haven Clause 1, and the measured survey you keep is the same document that governs the final invoice.
Neighborhoods We Serve in Westgate
We work throughout Westgate’s unincorporated Palm Beach County area, from the original 1960s subdivisions to the 1970s-1980s infill pockets. Crews respond to all listed neighborhoods from our local service routing, with most measured surveys scheduled within two business days of contact.
- Westgate Heights
- Westgate Manor
- Westgate Estates
- Belvedere Homes area (adjacent Westgate service zone)
- Forest Hill vicinity
Service Area - Cities Near Westgate
We serve Westgate homeowners directly, with dispatch coordinated from our Miami office for efficiency across Palm Beach County. Our service area extends to surrounding communities including Belle Glade, FL, South Bay, FL, Pahokee, FL, and Clewiston, FL, with the same Haven Standard applied to every measured survey and installation.
Serving Westgate, FL - Our Local Coverage Area
We’re based in the Westgate area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Westgate
Yes, Palm Beach County requires permits for all window and door replacements in unincorporated areas including Westgate; we pull the permit, schedule inspection, and provide the passed inspection documentation as part of every job scope.
We answer calls live 24/7 and typically schedule measured surveys within two business days; installation timing depends on product availability, with standard impact windows usually in stock and custom orders running 6-10 weeks.
Westgate has minimal HOA oversight compared to master-planned communities, but any HOA with architectural review authority must approve exterior changes; we provide product cut sheets, NOA documentation, and color samples to support your application.
Call (561) 286-4734 to schedule your free measured survey and written estimate. Every price is documented before any work starts, every job leaves a photo record, and every installation is covered by our 365-Day Done Right Promise under the Haven Standard.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Westgate Customers Say
"Front door install went smoothly. Written warranty, clear price, no pressure to upgrade anything."
- Nils H."The survey measurements and the quote were the same piece of paper. Nothing changed on install day, which is not what happened with the two other companies we had out."
- Annette R."Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T.