Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Lake Worth, FL
Window installation in Lake Worth typically runs $650-$1,400 per opening for standard vinyl units and $1,200-$2,800 for impact-rated replacements, with most jobs requiring permit coordination through the city’s Building Division. The dense concentration of 1920s-1950s bungalows north and south of Lake Avenue means we regularly encounter non-standard rough openings, original jalousie windows, and masonry surrounds that complicate modern unit placement. Crews are dispatched from our Miami office and serve Lake Worth homes directly. Call (561) 286-4734 to schedule your free measured survey.
Why Lake Worth Homes Are Different
Lake Worth Beach holds one of Palm Beach County’s densest concentrations of 1920s-1950s wood-frame and CBS bungalows, many still fitted with original jalousie windows that are completely non-compliant with the county’s current wind-borne debris impact requirements. Replacements in the city’s historic district also require Historic Preservation Board review, creating a dual regulatory hurdle that contractors in newer neighboring cities simply don’t encounter.
The city’s position immediately west of the Lake Worth Lagoon places it in the highest-risk wind-borne debris zone, and the salt-laden air accelerates aluminum frame oxidation and steel hardware failure measurably faster than in inland Palm Beach County communities. In older CBS homes, jalousie removal often reveals rotted or spalled masonry at the original opening, requiring block repair before any impact unit can be set. This step-up scope rarely appears in estimates pulled from newer suburbs and consistently surprises out-of-area crews who haven’t worked the local housing stock.
Our Main Lake Worth Services
These are the two services Lake Worth homeowners call about most, with details on their dedicated pages.
Window Replacement in Lake Worth
Window replacement in Lake Worth addresses the full spectrum of aging units found in the city’s pre-1960 housing stock, from original single-pane aluminum sliders to failed jalousie assemblies in historic district properties. Every job begins with a measured survey that documents rough opening dimensions, frame condition, and any masonry repair needed before product selection. We coordinate permit submission and Historic Preservation Board documentation where required. Window Replacement in Lake Worth covers product lines, code compliance, and what the written quote includes.
Impact Windows & Doors in Lake Worth
Impact windows and doors in Lake Worth must satisfy Florida Building Code wind-borne debris requirements for the city’s exposure category, with products tested to ASTM E1886 and E1996 standards. We specify PGT and CGI lines by performance tier and price range, matching the opening’s structural capacity and the homeowner’s budget. Historic district installations require additional aesthetic review, and we prepare the documentation package as part of our standard scope. Impact Windows & Doors in Lake Worth details the full product range and compliance process.
Sliding & Patio Doors in Lake Worth
Sliding and patio door replacement in Lake Worth focuses on the 3-panel and 4-panel configurations common in mid-century additions and 1980s-era renovations throughout the city’s eastern neighborhoods. Salt-air corrosion of tracks and hardware is the primary failure mode we see, often accompanied by frame seal degradation that allows water intrusion during the summer storm season. We measure sightline, track depth, and header load before specifying replacement units. Sliding & Patio Doors in Lake Worth covers sizing, hardware options, and installation specifics.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Lake Worth
Window installation in Lake Worth demands familiarity with the city’s non-standard rough openings, masonry surrounds, and dual regulatory environment of Florida Building Code plus historic preservation review. The 1920s-1950s bungalows north and south of Lake Avenue frequently present jalousie windows set in spalled or rotted masonry that must be repaired before any modern unit can be placed. Window Installation covers our full methodology; what follows is how we handle Lake Worth’s specific conditions.
Single & Double Hung Windows
Signs you need it
Original single-pane aluminum units that rattle in wind, show condensation between failed thermal breaks, or no longer stay open without a prop.
What it costs in Lake Worth
Vinyl single or double hung installation in Lake Worth typically ranges $650-$1,200 per opening, while impact-rated units run $1,200-$2,200 depending on size and masonry condition.
How we do it
We remove the existing frame, document masonry condition with photos, repair spalled block or rotted wood as needed, set the new unit plumb and square, foam-seal the perimeter, and finish with interior trim that matches the original sightline.
3-Panel Sliding (3-Lite Roller) Windows
Signs you need it
Sticking rollers, bent tracks from salt corrosion, or frames that leak during summer storms despite apparent seal integrity.
What it costs in Lake Worth
Standard 3-lite roller installation runs $900-$1,600 per unit in Lake Worth, with impact-rated versions at $1,800-$2,800 where the header can support the additional weight without reinforcement.
How we do it
We measure track depth and header load capacity, remove the existing assembly, repair or reinforce the header if needed, set the new 3-panel unit on a corrosion-resistant track system, and verify smooth operation before sealing.
What Window Installation Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Vinyl single/double hung (standard) | $650 - $1,200 |
| Impact-rated single/double hung | $1,200 - $2,200 |
| 3-panel sliding (standard) | $900 - $1,600 |
| 3-panel sliding (impact-rated) | $1,800 - $2,800 |
Do you pull permits for window installation in Lake Worth?
Yes. We submit to the Lake Worth Beach Building Division for all window replacements that alter the opening or change the product type, and we handle Historic Preservation Board documentation for properties in the designated district. The permit status and inspection schedule are included in your written scope. Call (561) 286-4734 to schedule your free measured survey.
Will my quote include masonry repair if you find damage?
We inspect every opening for spalled block or rotted wood during the measured survey and document findings with photos; if repair is likely, we include a line-item allowance in the written quote so the price does not change once work starts. Call (561) 286-4734 for an exact quote - estimates are free.
Door Installation in Lake Worth
Door installation in Lake Worth must account for the same salt-air acceleration of hardware failure that affects windows, plus the security and wind-load demands of Florida Building Code exposure in a high-velocity hurricane zone. Entry doors in the city’s older bungalows often sit in masonry openings with compromised thresholds or corroded frames that require reconstruction before a new unit can be properly set. Door Installation covers our full product range; below is how we handle Lake Worth’s specific door conditions.
Entry Doors
Signs you need it
Corroded hinges that no longer support proper alignment, threshold rot allowing water intrusion, or a frame that has shifted in the masonry opening and no longer seals.
What it costs in Lake Worth
Standard entry door installation in Lake Worth ranges $800-$1,500, with fiberglass or steel impact-rated units at $1,500-$3,200 depending on sidelight configuration and masonry repair needs.
How we do it
We remove the existing door and frame, assess the masonry opening for spalling or moisture damage, repair as needed, set the new pre-hung unit with composite shims and structural screws, seal with backer rod and polyurethane, and verify latch and deadbolt alignment.
Hurricane-Proof Front & Entry Doors
Signs you need it
Current door lacks Miami-Dade or Florida Product Approval for HVHZ installation, or the glass insert is not impact-rated despite the frame meeting code.
What it costs in Lake Worth
Impact-rated entry door systems in Lake Worth typically run $1,800-$3,500 installed, with decorative glass inserts from Therma-Tru or ViewLux adding $400-$900 depending on size and pattern.
How we do it
We verify the existing opening against the approved product drawing, reinforce the header if the impact unit exceeds original weight, set the door with code-required hardware and three-point locking, and schedule inspection with the Building Division.
What Door Installation Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Standard entry door (fiberglass/steel) | $800 - $1,500 |
| Impact-rated entry door | $1,500 - $3,200 |
| Hurricane-proof front door with decorative glass | $1,800 - $3,500 |
Do impact doors require different hardware than standard doors?
Yes. Florida Building Code requires three-point locking systems and specific hinge screws for HVHZ-rated entry doors; we specify and install this hardware as part of the standard scope, not as an add-on. Call (561) 286-4734 to schedule your free measured survey.
Can you match a new door to my home’s historic character?
We work with Therma-Tru and ViewLux lines that offer period-appropriate panel profiles and decorative glass patterns, and we prepare the Historic Preservation Board documentation package for designated properties. Call (561) 286-4734 for an exact quote - estimates are free.
Energy-Efficient Windows in Lake Worth
Energy-efficient windows in Lake Worth address the cooling load burden that original single-pane and failed early-thermal-break aluminum units impose on homes built before modern insulation standards. The city’s older bungalows north and south of Lake Avenue were constructed with minimal wall insulation and depend on window performance to manage solar heat gain; upgrading to low-E, argon-filled units with proper U-factor and SHGC ratings can reduce HVAC runtime measurably. Energy-Efficient Windows covers the full technical specification; what follows is how we apply efficiency upgrades to Lake Worth’s housing stock.
Low-E & Argon Gas Glass
Signs you need it
Rooms that overheat despite closed blinds, or utility bills that spike in summer without corresponding thermostat changes.
What it costs in Lake Worth
Low-E/argon upgrade on standard vinyl windows in Lake Worth adds $80-$150 per opening to base installation, with total project costs of $730-$1,350 per unit depending on size and frame condition.
How we do it
We specify the appropriate low-E coating for east-west versus north-south exposure, verify argon fill at the factory with certification documentation, and install with foam perimeter seal to prevent air infiltration around the frame.
ENERGY STAR Replacement Windows
Signs you need it
Current windows lack the National Fenestration Rating Council label, or the home fails to qualify for utility rebate programs due to outdated U-factor and SHGC performance.
What it costs in Lake Worth
ENERGY STAR-certified vinyl replacement windows in Lake Worth typically range $750-$1,400 per opening installed, with premium frames and triple glazing at the upper end for homes with direct lagoon exposure.
How we do it
We measure each opening, specify the NFRC-certified product that meets or exceeds the local climate zone requirements, install with continuous air barrier detailing, and provide the certification documentation for rebate submission.
What Energy-Efficient Windows Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Low-E/argon upgrade (add to base window) | $80 - $150 |
| Low-E/argon vinyl window, installed | $730 - $1,350 |
| ENERGY STAR replacement window, installed | $750 - $1,400 |
Will energy-efficient windows reduce my cooling costs in Lake Worth?
Yes. Properly specified low-E windows with low SHGC can reduce solar heat gain by 40-60% compared to single-pane units, which translates to measurable HVAC runtime reduction in Lake Worth’s cooling-dominated climate. Call (561) 286-4734 to schedule your free measured survey.
Do you verify factory argon fill, or is that assumed?
We require factory certification of argon fill percentage and spot-check with a gas analyzer on random units; the documentation travels with your job file as part of our Evidence on Every Job standard. Call (561) 286-4734 for an exact quote - estimates are free.
Impact Garage Doors in Lake Worth
Impact garage doors in Lake Worth must satisfy the same HVHZ wind-borne debris requirements as windows and entry doors, yet many homes in the city’s 1970s-1990s subdivisions still carry original non-rated sectional doors that fail to protect the largest opening in the structure. The salt-laden air accelerates torsion spring corrosion and track degradation, and a failed garage door in a storm event creates internal pressurization that can compromise the roof structure. Impact Garage Doors covers our full product and wind-load engineering; below is how we handle Lake Worth installations.
Hurricane-Rated Garage Doors
Signs you need it
Current door lacks Florida Product Approval label, or the existing door has been damaged in a previous storm and repaired with non-rated panels.
What it costs in Lake Worth
Hurricane-rated garage door installation in Lake Worth typically ranges $1,800-$3,500 for a standard two-car opening, with premium insulated impact panels at $3,200-$5,500 depending on wind-load rating and window insert configuration.
How we do it
We measure the opening and verify header capacity against the engineered wind-load drawing, specify the rated door and track system for the exposure category, install with code-required struts and hardware, and schedule inspection.
Wind-Load Code Compliance
Signs you need it
Building permit for other work triggers a garage door inspection that fails, or insurance renewal requires documentation of HVHZ-compliant garage protection.
What it costs in Lake Worth
Wind-load retrofit of an existing garage door with approved reinforcement kit in Lake Worth runs $800-$1,500 if the door and track are compatible; full replacement is required for incompatible systems.
How we do it
We assess the existing door for retrofit compatibility against the engineer’s drawing, install the approved reinforcement system if applicable, or specify and install a complete rated replacement if the existing unit cannot be brought to code.
What Impact Garage Doors Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Hurricane-rated garage door (standard) | $1,800 - $3,500 |
| Hurricane-rated garage door (premium insulated) | $3,200 - $5,500 |
| Wind-load retrofit kit (compatible door) | $800 - $1,500 |
Can any garage door be retrofitted for wind-load compliance?
No. Only specific door models and vintages accept approved reinforcement kits; we verify compatibility against the Florida Product Approval database before quoting retrofit versus replacement. Call (561) 286-4734 to schedule your free measured survey.
Do impact garage doors require special openers?
Impact-rated doors are heavier and may require opener upgrade to handle the additional load; we specify opener capacity as part of the written quote when needed, never as a surprise add-on. Call (561) 286-4734 for an exact quote - estimates are free.
Custom & Geometric Windows in Lake Worth
Custom and geometric windows in Lake Worth serve two distinct needs: the historic district’s requirement that replacement units maintain original sightline proportions and muntin patterns, and the architectural statement openings that homeowners in renovated properties specify for natural light and lagoon views. The city’s 1920s-1950s bungalows feature true divided-light and curved-top units that cannot be satisfied with standard catalog products, while newer homes near the Intracoastal often incorporate oversized geometric assemblies. Custom & Geometric Windows covers our full custom capability; what follows is Lake Worth-specific application.
Geometric & Shaped Windows
Signs you need it
Existing shaped window has failed seal or broken lite, or a rectangular replacement would violate historic district sightline requirements.
What it costs in Lake Worth
Geometric and shaped window installation in Lake Worth typically ranges $1,200-$2,800 per unit for standard configurations, with complex curves or true divided-light muntins at $2,500-$4,500 depending on pattern complexity and impact rating.
How we do it
We template the exact radius or angle with digital measurement, submit the drawing for Historic Preservation Board review when required, fabricate to specification in PGT or ViewLux custom lines, and install with perimeter seal matching the original profile.
Arched & Curved Windows
Signs you need it
Original arched window in a pre-1960 bungalow has rotted frame or failed glazing, or a previous owner installed a flat-topped replacement that disrupts the facade.
What it costs in Lake Worth
Arched and curved window replacement in Lake Worth runs $1,800-$3,500 for vinyl or aluminum units, with impact-rated custom curves at $3,200-$5,500 where the radius exceeds standard catalog limits.
How we do it
We capture the exact spring-line and radius with digital template, verify structural support for the curved header, fabricate the unit with custom jamb and sill profiles, and finish to match surrounding trim.
What Custom & Geometric Windows Costs in Lake Worth
| Item | Typical range in Lake Worth |
|---|---|
| Geometric/shaped window (standard) | $1,200 - $2,800 |
| Geometric/shaped window (complex/impact-rated) | $2,500 - $4,500 |
| Arched/curved window (standard) | $1,800 - $3,500 |
| Arched/curved window (impact-rated) | $3,200 - $5,500 |
How long does Historic Preservation Board review take for custom windows?
Typical review cycle is 4-6 weeks in Lake Worth; we prepare the full documentation package including elevation drawings and material samples, and we do not schedule fabrication until approval is received. Call (561) 286-4734 to schedule your free measured survey.
Can you replicate the original muntin pattern in an impact-rated custom window?
Yes. PGT and ViewLux custom lines offer true divided-light and simulated divided-light options with SDL bars that replicate historic patterns while maintaining impact-rated glazing; we specify by sightline requirement and code compliance. Call (561) 286-4734 for an exact quote - estimates are free.
Brands We Service in Lake Worth
We specify from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - selected by what the opening requires, not by what is in stock. Common hardware and weatherstrip components for PGT and Therma-Tru are stocked locally for Lake Worth service calls, with most non-stock parts available within 3-5 business days. See our brands for full performance tier and specification details.
Pricing for Windows & Doors in Lake Worth, FL
| Service | Typical range in Lake Worth |
|---|---|
| Vinyl single/double hung window | $650 - $1,200 |
| Impact-rated single/double hung window | $1,200 - $2,200 |
| 3-panel sliding window (standard) | $900 - $1,600 |
| 3-panel sliding window (impact-rated) | $1,800 - $2,800 |
| Standard entry door | $800 - $1,500 |
| Impact-rated entry door | $1,500 - $3,200 |
| Hurricane-rated garage door | $1,800 - $3,500 |
| Geometric/shaped window | $1,200 - $2,800 |
| Arched/curved window (impact-rated) | $3,200 - $5,500 |
| Low-E/argon upgrade (per opening) | $80 - $150 |
Prices in Lake Worth push toward the upper end when we encounter spalled masonry at original jalousie openings, header reinforcement for impact units, or Historic Preservation Board documentation requirements. The written quote you receive before any work starts is the same document as the final invoice - Haven Clause 1, Have it in writing.
Neighborhoods We Serve in Lake Worth
We serve homes throughout Lake Worth’s established neighborhoods, from the historic district core to the mid-century subdivisions east and west of Dixie Highway. Crews are dispatched from our Miami office and typically arrive within scheduled windows across the city.
- Historic District (north and south of Lake Avenue)
- Parrot Cove
- South Palm Park
- College Park
- Lucerne
Service Area - Cities Near Lake Worth
Sightline crews serve the full central Palm Beach County corridor, with measured surveys and installation available in Wellington, FL, Greenacres, FL, Royal Palm Beach, FL, and Boynton Beach, FL. Each city has distinct housing stock and code enforcement practices; we adjust our survey protocol and documentation accordingly.
Serving Lake Worth, FL - Our Local Coverage Area
We’re based in the Lake Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Lake Worth
Yes. The Lake Worth Beach Building Division requires permits for window and door replacements that alter the opening size or change the product type; we submit the application and schedule inspections as part of our standard scope. Historic district properties require additional Historic Preservation Board review, which we also coordinate.
Call (561) 286-4734 - a live person answers, 24/7 - and we will arrange a survey appointment at your Lake Worth property. You keep the measured survey document, and the written quote derived from it cannot differ from that record.
We provide the product specification sheets, color samples, and installation drawings that most HOAs require for architectural review, and we coordinate with your association’s approval timeline before ordering materials. The written scope notes any HOA-mandated product restrictions so there are no surprises.
Call (561) 286-4734 to schedule your free measured survey. Every job leaves a documented photo record and carries our 365-Day Done Right Promise, written into the Haven Standard since 2012.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lake Worth Customers Say
"Patio door had dropped and would not lock. They adjusted it rather than selling me a new one, and charged accordingly."
- Simone T."They photographed the rotten sill they found under the old frame before replacing it, and the extra cost was agreed in writing before they carried on."
- Rosalind C."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B.